Your browser does not support JavaScript! > توشیبا استودیو Toshiba e-Studio 506SE

   کانال تلگرام کپی ایران

(0) محصول
سه شنبه, 04 اسفند 1394 14:35

توشیبا استودیو Toshiba e-Studio 506SE

نوشته شده توسط
این مورد را ارزیابی کنید
(0 رای‌ها)

ایرادات دستگاهای توشیبا  براساس کد می باشد شرکت کپی ایران در نظر داردتمامی سرویس منالها و رفع ایرادادت را در اختیار شما عزیزان قرار دهد

 

 

  1.  Main motor abnormality: The main motor is not rotating normally
    C040    PFP motor abnormality: The PFP motor is not rotating normally
    C130    Upper drawer tray abnormality: The upper drawer tray motor is not rotating or the upper drawer tray is not moving normally  copyir.com
    C140    Lower drawer tray abnormality: The lower drawer tray motor is not rotating or the lower drawer tray is not moving normally
    C150    PFP upper drawer tray abnormality: The PFP upper drawer tray motor is not rotating or the PFP upper drawer tray is not moving normally
    C160    PFP lower drawer tray abnormality: The PFP lower drawer tray motor is not rotating or the PFP lower drawer tray is not moving normal
    C180    LCF tray-up motor abnormality: The LCF tray-up motor is not rotating or the LCF tray is not moving normally  copyir.com
    C1A0    LCF end fence motor abnormality: The LCF end fence motor is not rotating or the LCF end fence is not moving normally  copyir.com
    C1B0    LCF transport motor abnormality: The LCF transport motor is not rotating normally  copyir.com
    C260    Peak detection error: Lighting of the exposure lamp (white referenceکپی ایران  is not detected when power is turned ON  copyir.com
    C270    Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified period of time  copyir.com
    C280    Carriage home position sensor not turning ON within a specified period of time: The carriage does not reach to its home position in a specified period of time  copyir.com
    C290    Scanner fuse blowout: 24V power for the scanning system is not supplied at the scanner warming-up after power-ON  copyir.com
    C3D0    EPU board memory overwriting error: The overwriting of the EPU board memory fails  copyir.com
    C3D1    EPU board memory new parts detection error: The EPU board detects the process unit as a new unit when the equipment is started in the normal mode  copyir.com
    C3D2    EPU board memory old parts detection error: The EPU board cannot detect the new process unit when the equipment is started in the EPU replacement mode ([7] + [START]کپی ایران   copyir.com
    C410    Thermistor or heater abnormality at power-ON: Abnormality of service call the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON  copyir.com
    C430    Thermistor abnormality after abnormality judgment: Abnormality of the thermistor is detected after a specified period of time has passed from power-ON (including ready stateکپی ایران   copyir.com
    C440    Heater abnormality after abnormality judgment: The temperature of the fuser roller has exceeded the range of control or does not even reach the range  copyir.com
    C450    Thermistor abnormality during printing: Abnormality of the thermistor is detected during printing  copyir.com
    C4C0    Fuser unit new/old detection fuse abnormality
    C550    RADF I/F error: Communication error has occurred between the RADF and the scanner  copyir.com
    C551    Document feeder model detection error: An optional document feeder that is not compatible to this equipment is installed  copyir.com
    C570    Communication error between Engine-CPU and IPC board
    C580    Communication error between IPC board and finisher
    C5A0    EEPROM communication abnormality (LGC boardکپی ایران
    C8E0    ADF communication abnormality: The system has to be stopped because the control abnormality occurred
    C940    Engine-CPU abnormality
    C970    High-voltage transformer abnormality: Leakage of the main charger is detected  copyir.com
    CA10    Polygonal motor abnormality: The polygonal motor is not rotating normally  copyir.com
    CA20    H-Sync detection error: H-Sync detection PC board cannot detect laser beams  copyir.com
    CB00    Finisher not connected
    CB01    Finisher communication error
    CB10    Entrance motor abnormality: The entrance motor is not rotating normally  copyir.com [MJ-1101/MJ-1106]
    CB11    Buffer tray guide motor abnormality: The buffer tray guide motor is not rotating or the buffer tray guide is not moving normally  copyir.com [MJ-1101/MJ-1106]
    CB12    Buffer roller drive motor abnormality: The buffer roller drive motor is not rotating or the buffer roller is not moving normally  copyir.com [MJ-1101/MJ-1106]
    CB13    Finisher exit motor abnormality [MJ-1101/MJ-1106]
    CB14    Paper holding arm motor abnormality [MJ-1101/MJ-1106]
    CB30    Movable tray shift motor abnormality: The movable tray shift motor is not rotating or the movable tray is not moving normally  copyir.com [MJ-1101] Movable tray shift motor abnormality: The movable tray shift motor or the movable tray does not work properly  copyir.com [MJ-1032] Movable tray shift motor abnormality: The movable tray shift motor or the movable tray does not work properly  copyir.com [MJ-1033]
    CB31    Movable tray paper-full detection error: The actuator of the movable tray paper-full detection sensor does not move smoothly  copyir.com [MJ-1101/MJ-1106]
    CB40    Front alignment motor abnormality: The front alignment motor is not rotating or the front align/1106ment plate is not moving normally  copyir.com [MJ-1101] Front alignment plate home position detection error: The detection of the home position ends abnormally because the front alignment plate has not worked properly  copyir.com [MJ-1032/MJ-1033]
    CB50    Stapler home position error: The stapler home position sensor does not work  copyir.com [MJ-1101/MJ-1106] Stapler unit home position detection error: The detection of the home position of the stapler unit ends abnormally  copyir.com [MJ-1032/MJ-1033
    CB51    Stapler shift home position error: The stapler is not at the home position  copyir.com [MJ-1101/MJ-1106] Stapler unit sliding home position detection error: The detection of the home position of the stapler unit sliding ends abnormally  copyir.com [MJ-1032/MJ-1033]
    CB60    Stapler shift motor abnormality: Stapler shift motor is not rotating or staple unit is not moving normally  copyir.com [MJ-1101/MJ-1106]
    CB80    Backup RAM data abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON  copyir.com [MJ-1101/MJ-1106] EEPROM data abnormality: An error occurs during the writing of data into the EEPROM of the Finisher  copyir.com [MJ- 1032/MJ-1033]
    CB81    Flash ROM abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON  copyir.com [MJ-1101/MJ-1106]
    CB82    Finisher - Main CPU program error
    CB83    Saddle Stitch Finisher - Main CPU program error [MJ- 1106]
    CB84    Hole Punch Unit - Main CPU program error
    CB90    Paper pushing plate motor abnormality: Paper pushing plate motor is not rotating or paper pushing plate is not moving normally  copyir.com
    CB91    Saddle Stitch Finisher flash ROM abnormality [MJ-1106]
    CB92    Saddle Stitch Finisher RAM abnormality [MJ-1106]
    CB93    Additional folding motor abnormality [MJ-1106]
    CB94    Saddle transport motor abnormality [MJ-1106]
    CB95    Stacker motor abnormality [MJ-1106]
    CBA0    Front saddle stapler home position error: The stapler home position detection is abnormally operated and finished  copyir.com [MJ-1106]
    CBB0    Rear saddle stapler home position error: The stapler home position detection is abnormally operated and finished  copyir.com [MJ-1106]
    CBC0    Saddle Stitch Finisher side alignment motor (M15کپی ایران  abnormality: The alignment motor is not rotating or the alignment plate is not working properly  copyir.com [MJ- 1106]
    CBE0    Saddle Stitch Finisher folding motor (M17کپی ایران  abnormality: The folding motor is not rotating or the folding roller is not moving normally  copyir.com [MJ-1106]
    CBF0    Stacker motor (M9کپی ایران  abnormality : The stacker motor is not rotating  copyir.com [MJ-1033]
    CC01    A model not supporting the Finisher is connected  copyir.com Note that this error is recognized in the communication converter and is output  copyir.com
    CC02    Stack exit roller nip home position detection error: The detection of the home position of the stack exit roller nip ends abnormally  copyir.com [MJ-1032/MJ-1033]
    CC20    Saddle communication error [MJ-1106]
    CC21    The detection of the home position of the saddle stitch 3rd transport roller drive motor ends abnormally  copyir.com
    CC22    The detection of the home position of the saddle stitch stapler unit ends abnormally  copyir.com
    CC30    Stack transport motor abnormality: The stack transport motor is not rotating or the stack transport belt is not moving normally  copyir.com [MJ-1101/MJ-1106]
    CC31    Transport motor abnormality: The transport motor is not rotating or the stack transport roller -1 and -2 is not rotating normally  copyir.com [MJ-1101/MJ-1106]
    CC41    Paper holder cam home position abnormality: The paper holder cam is not at the home position  copyir.com [MJ- 1101]
    CC51    Sideways adjustment motor (M2کپی ایران  abnormality: Sideways adjustment motor is not rotating or puncher is not shifting normally  copyir.com [MJ-1101/MJ-1106 (when MJ-6103 is installedکپی ایران ]
    CC52    Skew adjustment motor (M1کپی ایران  abnormality: Skew adjustment motor is not rotating or puncher is not shifting normally  copyir.com [MJ-1101/MJ-1106 (when MJ- 6103 is installedکپی ایران ]
    CC53    An abnormality occurs in the punch waste full sensor  copyir.com
    CC54    Hole punch registration sensor detection error: An abnormality occurs in the hole punch registration sensor  copyir.com [MJ-1032/MJ-1033]
    CC60    Punch motor abnormality: Punch motor is not rotating or puncher is not shifting normally  copyir.com]
    CC61    Punch motor (M3کپی ایران  home position detection error: Punch motor is not rotating or puncher is not shifting normally  copyir.com [MJ-1101/MJ-1106 (when MJ-6103 is installedکپی ایران ]
    CC71    Punch ROM checksum error: Abnormality of checksum value on Hole punch controller PC board is detected when the power is turned on  copyir.com [MJ-1101/MJ-1106 (when MJ-6103 is installedکپی ایران ]
    CC72    Punch RAM read/write error: Abnormality of checksum value on Hole punch controller PC board is detected when the power is turned on  copyir.com [MJ-1101/MJ-1106 (when MJ-6103 is installedکپی ایران ]
    CC80    Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally  copyir.com [MJ-1101/MJ-1106] Rear alignment plate home position detection error: The detection of the home position ends abnormally because the rear alignment plate has not worked properly  copyir.com [MJ-1032/MJ-1033]
    CC91    The detection of the home position of the gripper arm ends abnormality  copyir.com
    CC92    The movable tray exceeds its upper limit  copyir.com
    CC93    Knurled roller shift solenoid abnormality: An abnormality occurs in the knurled roller shift solenoid  copyir.com [MJ-1032]
    CC94    1st fan motor abnormality: The 1st fan motor is locked abnormally  copyir.com [MJ-1032]
    CCF1    Tray safety switch abnormality - The tray safety switch turned on during tray operation (moving up or downکپی ایران   copyir.com
    CDE0    Paddle motor abnormality: The paddle motor does not rotate properly  copyir.com
    CDF0    Initialization error of the offset tray: The home position of the separator cannot be detected when the power is turned ON  copyir.com
    CE00    Communication error between finisher unit and puncher unit: Communication error between the finisher controller PC board and punch controller PC board  copyir.com
    CE50    Temperature/humidity sensor abnormality: The output value of this sensor is out of a specified range  copyir.com
    CE90    Drum thermistor abnormality: The output value of the drum thermistor-K is out of a specified range  copyir.com
    CF10    Communication module SRAM reading failure  copyir.com [MJ-1101]
    E010    Jam not reaching the exit sensor: The paper which has passed through the fuser unit does not reach the exit sensor  copyir.com
    E020    Stop jam at the exit sensor: The trailing edge of the paper does not pass the exit sensor after its leading edge has reached this sensor  copyir.com
    E030    Power-ON jam: The paper is remaining on the paper transport path when power is turned ON  copyir.com
    E061    Incorrect paper size setting for upper drawer: The size of paper in the 1st drawer differs from size setting of the equipment  copyir.com
    E062    Incorrect paper size setting for lower drawer: The size of paper in the 2nd drawer differs from size setting of the equipment  copyir.com
    E063    Incorrect paper size setting for PFP upper drawer: The size of paper in the 3rd drawer differs from size setting of the equipment  copyir.com
    E064    Incorrect paper size setting for PFP lower drawer: The size of paper in the 4th drawer differs from size setting of the equipment  copyir.com
    E065    Incorrect paper size setting for bypass tray: The size of paper in the bypass tray differs from size setting of the equipment
    E090    HDD abnormality causes jam: Image data to be printed cannot be prepared  copyir.com
    E110    ADU misfeeding (Paper not reaching the registration sensorکپی ایران : The paper which has passed through ADU does not reach the registration sensor during duplex printing
    E120    Bypass misfeeding (Paper not reaching the 1st transport sensorکپی ایران : The paper fed from the bypass tray does not reach the 1st transport sensor
    E130    Upper drawer misfeeding (Paper not reaching the 1st transport sensorکپی ایران : The paper fed from the upper drawer does not reach the 1st transport sensor  copyir.com
    E140    Lower drawer misfeeding (Paper not reaching the 2nd transport sensorکپی ایران : The paper fed from the lower drawer does not reach the 2nd transport sensor  copyir.com
    E150    PFP upper drawer misfeeding (Paper not reaching the PFP upper drawer feed sensorکپی ایران : The paper fed from the PFP upper drawer does not reach the PFP upper drawer feed sensor  copyir.com
    E160    PFP lower drawer misfeeding (Paper not reaching the PFP lower drawer feed sensorکپی ایران : The paper fed from the PFP lower drawer does not reach the PFP lower drawer feed senso
    E190    LCF misfeeding (Paper not reaching the LCF feed sensorکپی ایران : The paper fed from the LCF does not reach the LCF feed sensor  copyir.com
    E200    Upper drawer transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor
    E210    Lower drawer transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor
    E220    Lower drawer transport jam (Paper not reaching the 1st transport sensorکپی ایران : The paper does not reach the 1st transport sensor after it has passed the lower drawer feed sensor  copyir.com
    E270    Bypass transport jam (paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor  copyir.com
    E280    ADU transport jam (paper not reaching the registration sensorکپی ایران : The paper which has passed through ADU and the 1st transport sensor does not reach the registration sensor during duplex printing
    E300    PFP upper drawer transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor  copyir.com
    E310    PFP upper drawer transport jam (Paper not reaching the 1st transport sensorکپی ایران : The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor  copyir.com
    E320    PFP upper drawer transport jam (Paper not reaching the 2nd transport sensorکپی ایران : The paper does not reach the 2nd transport sensor after it has passed the PFP upper drawer feed sensor  copyir.com
    E330    PFP lower drawer transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor  copyir.com
    E340    PFP lower drawer transport jam (Paper not reaching the 1st transport sensorکپی ایران : The paper does not reach the 1st transport sensor after it has passed the PFP lower drawer feed sensor  copyir.com
    E350    PFP lower drawer transport jam (Paper not reaching the 2nd transport sensorکپی ایران : The paper does not reach the 2nd transport sensor after it has passed the PFP upper drawer feed sensor  copyir.com
    E360    PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensorکپی ایران : The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor  copyir.com
    E3C0    LCF transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor  copyir.com
    E3D0    LCF transport jam (Paper not reaching the 1st transport sensorکپی ایران : The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor  copyir.com
    E3E0    LCF transport jam (Paper not reaching the 2nd transport sensorکپی ایران : The paper does not reach the 2nd transport sensor after it has passed the LCF feed sensor  copyir.com
    E410    Front cover open jam: The front cover has opened during printing  copyir.com
    E420    PFP side cover open jam: The PFP side cover has opened during printing  copyir.com
    E430    ADU open jam: The ADU has opened during printing
    E440    Feed cover open jam: The feed cover has opened during printing  copyir.com
    E450    LCF side cover open jam: The LCF side cover has opened during printing  copyir.com
    E480    Bridge unit open jam: The bridge unit has opened during printing  copyir.com
    E490    Job separator cover open jam: The job separator cover has opened during printing  copyir.com
    E491    Offset tray cover open jam: The offset tray cover has opened during printing  copyir.com
    E510    Jam not reaching the ADU entrance sensor: The paper does not reach the ADU entrance sensor after it is switchbacked in the exit section  copyir.com
    E520    Stop jam in the ADU: The paper does not reach the ADU exit sensor after it has passed the ADU entrance sensor  copyir.com
    E550    Paper remaining jam on the transport path: The paper is remaining on the transport path when printing is finished (caused by a multiple paper feedingکپی ایران   copyir.com
    E570    Jam not reaching the reverse sensor: The paper which has passed the exit sensor does not reach the reverse sensor
    E580    Stop jam at the reverse sensor: The trailing edge of the paper does not pass the reverse sensor after its leading edge has reached this sensor
    E712    Jam not reaching the registration sensor: The original fed from the original feeding tray does not reach the registration sensor  copyir.com
    E714    Feed signal reception jam: The feed signal is received even no original exists on the original feeding tray  copyir.com
    E721    Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse sideکپی ایران  or the reverse sensor (when scanning reverse sideکپی ایران   copyir.com
    E722    Jam not reaching the exit sensor (during scanningکپی ایران : The original which passed the read sensor does not reach the exit sensor when it is transported from the scanning section to exit section  copyir.com
    E724    Stop jam at the registration sensor: The trailing edge of the original does not pass the registration sensor after its leading edge has reached this sensor  copyir.com
    E725    Stop jam at the read sensor: The trailing edge of the original does not pass the read sensor after its leading edge has reached this sensor  copyir.com
    E731    Stop jam at the exit sensor: The trailing edge of the original does not pass the exit sensor after its leading edge has reached this sensor  copyir.com
    E860    RADF jam access cover open: The RADF jam access cover has opened during RADF operation  copyir.com
    E870    RADF open jam: RADF has opened during RADF operation  copyir.com
    E871    Cover open jam in the read ready status: Jam caused by opening of the RADF jam access cover or front cover while the RADF is waiting for the scanning start signal from the equipment  copyir.com
    E910    Jam at the bridge unit transport sensor-1: The paper does not reach the bridge unit transport sensor-1 after it has passed the exit sensor  copyir.com
    E920    Stop jam at the bridge unit transport sensor-1: The trailing edge of the paper does not pass the bridge unit transport sensor-1 after its leading edge has reached the sensor  copyir.com
    E930    Jam at the bridge unit transport sensor-2: The trailing edge of the paper does not reach the bridge unit transport sensor-2 after its leading edge has reached the bridge unit transport sensor-1  copyir.com
    E940    Stop jam at the bridge unit transport sensor-2: The trailing edge of the paper does not reach the bridge unit transport sensor-2 after its leading edge has reached the bridge unit transport sensor-2  copyir.com
    E950    Jam not reaching the job separator transport sensor: The paper has passed through the exit sensor does not reach the job separator transport sensor  copyir.com
    E951    Stop jam at the job separator transport sensor: The trailing edge of the paper does not pass the job separator transport sensor
    E960    Jam not reaching the offset tray transport sensor: The paper has passed through the exit sensor does not reach the offset tray transport sensor  copyir.com
    E961    Stop jam at the offset tray transport sensor: The trailing edge of the paper does not pass the offset tray transport sensor  copyir.com
    E9F0    Punching jam: Punching is not performed properly  copyir.com [MJ-1025 (When MJ-6005 is installedکپی ایران ] Punching jam: Punching is not performed properly  copyir.com [MJ-1024 (when MJ-6004 is installedکپی ایران ] [MJ-1101 (when MJ-6101 is installedکپی ایران ]
    EA10    Paper transport delay jam: The paper which has passed the bridge unit does not reach the inlet sensor  copyir.com Paper transport delay jam: The paper which has passed the bridge unit does not reach the inlet sensor  copyir.com [MJ-1024/1031/1101]
    EA20    Paper transport stop jam: The paper does not pass through the inlet sensor  copyir.com [MJ-1025/MJ-1031] Paper transport stop jam: The paper has passed through the inlet sensor but does not reach or pass the feed path sensor or processing tray sensor  copyir.com [MJ-1024] Paper transport delay jam: The paper which has passed through the inlet sensor does not reach the transport sensor  copyir.com [MJ- 1101
    EA21    Paper size error jam: Paper does not reach the sensor because the paper is shorter than spec  copyir.com
    EA22    Paper transport jam (Finisher paper punching edge detection sensorکپی ایران
    EA23    Paper transport jam (exit sensorکپی ایران
    EA24    Paper transport jam (between entrance and exit sensorsکپی ایران
    EA25    Paper transport jam (after paper stack exitکپی ایران
    EA26    Paper transport jam (stop command requestکپی ایران
    EA27    Paper transport jam (paper not insertedکپی ایران
    EA28    Paper transport jam (assisting arm operation delayکپی ایران
    EA29    Paper transport jam (stack transport delayکپی ایران
    EA30    Power-ON jam: Paper exists at the inlet sensor when power is turned ON  copyir.com
    EA31    Transport path paper remaining jam
    EA32    Exit paper remaining jam
    EA40    Door open jam: The Finisher is released from the equipment or any of the staple door and top cover is opened during printing  copyir.com [MJ-1025] Door open jam: Any of the upper cover and front cover of the Finisher or any of the upper door and front door of the Hole Punch Unit is opened during printing  copyir.com [MJ-1024] Joint open jam: The joint is released during printing or in the standby status  copyir.com [MJ-1031]
    EA50    Stapling jam: Stapling is not performed properly  copyir.com
    EA60    Early arrival jam: The inlet sensor detects the paper earlier than a specified timing
    EA70    Stack delivery jam: It cannot deliver the stack of paper on the intermediary process tray to the stack tray  copyir.com [MJ-1025] Stack slider home position error: The stack slider is not at the home position  copyir.com [MJ-1031]
    EA80    Stapling jam: Stapling is not performed properly  copyir.com [MJ-1024]
    EA90    Door open jam: The delivery cover or inlet cover has opened during printing [MJ-1024/MJ-1101]  copyir.com
    EAA0    Power-ON jam: Paper exists at No  copyir.com1 paper sensor, No  copyir.com 2 paper sensor, No  copyir.com3 paper sensor, vertical path paper sensor or delivery sensor when power is turned ON  copyir.com [MJ-1024/MJ-1101]
    EAB0    Saddle paper transport stop jam: The paper which passed through the inlet sensor does not reach or pass through the folding position sensor  copyir.com [MJ-1025]
    EAC0    Saddle transport delay jam: The paper which has reached the inlet sensor does not pass through this sensor  copyir.com [MJ-1025/MJ-1024]
    EAD0    Print end command time-out jam: The printing has not finished normally because of the communication error between the SYS board and LGC board at the end of printing  copyir.com
    EAE0    Receiving time time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher  copyir.com
    EB30    Ready time time-out jam: The equipment judges that the paper transport to the finisher is disabled because of the communication error between the equipment and finisher at the start of printing  copyir.com
    EB50    Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper  copyir.com
    EB60    Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper (redetection after no jam is detected at [EB50]کپی ایران   copyir.com
    ED10    Skew adjustment motor home position detection abnormality: The Skew adjustment motor is not at the home position  copyir.com [MJ-1101 (when MJ-6101 is installedکپی ایران ]
    ED11    Sideways adjustment motor home position detection error: The Sideways adjustment motor is not at the home position  copyir.com [MJ-1101 (when MJ-6101 is installedکپی ایران ]
    ED12    Shutter home position error: The shutter is not at the home position  copyir.com [MJ-1101]
    ED13    Front alignment plate home position error: The front alignment plate is not at the home position  copyir.com [MJ- 1101]
    ED14    Rear alignment plate home position error: The rear alignment plate is not at the home position  copyir.com [MJ- 1101]
    ED15    Paddle home position error: The paddle is not at the home position  copyir.com [MJ-1101]
    ED16    Buffer tray home position error: The buffer tray is not at the home position  copyir.com [MJ-1101]
    F070    Communication error between System-CPU and Engine- CPU
    F090    SRAM abnormality on the SYS board
    F100_0    HDD format error: Operation of HDD key data fails  copyir.com
    F100_1    HDD format error: Encryption key data of either the SYS board or the SRAM board for the SYS board are damaged  copyir.com
    F100_2    HDD format error: Encryption key data of both the SYS board and the SRAM board for the SYS board are damaged  copyir.com
    F101    The HDD cannot be connected (mountedکپی ایران  caused by a reason other than one described in the F101_0 through F101_3 errors  copyir.com
    F101_0    HDD connection error (HDD connection cannot be detected  copyir.comکپی ایران
    F101_1    Root partition mount error (HDD formatting fails  copyir.comکپی ایران : The HDD cannot be connected (mountedکپی ایران  caused by damage to the areas in which the program is mainly stored  copyir.com
    F101_2    Normal partition mount error (HDD normal partition mounting fails  copyir.comکپی ایران : The HDD cannot be connected (mountedکپی ایران  caused by damage to areas other than those described in the F101_0 and F101_1 errors  copyir.com
    F101_3    Encryption partition mount error (HDD encryption partition mounting fails  copyir.comکپی ایران : The HDD cannot be connected (mountedکپی ایران  caused by damage to the areas in which the key is stored  copyir.com
    F102    HDD start error: HDD cannot become ‘Ready’ state  copyir.com
    F103    HDD transfer time-out: Reading/writing cannot be performed in the specified period of time  copyir.com
    F104    HDD data error: Abnormality is detected in the data of HDD  copyir.com
    F105    HDD other error
    F106_0    ADI-HDD error: Illegal disk replacement detected (ADIHDD Exchange to SATA-HDDکپی ایران
    F106_1    ADI-HDD error: HDD type detection error
    F106_2    ADI-HDD error: ADI encryption key download operation error
    F106_3    ADI-HDD error: ADI authentication Admin Password generation error
    F106_4    ADI-HDD error: Authentication random number generation error
    F106_5    ADI-HDD error: Authentication data transmission error
    F109_0    Key consistency error: Consistency check operation error  copyir.com
    F109_1    Key consistency error: SRAM encryption AES key data damage  copyir.com
    F109_2    Key consistency error: Signature Check public key damage  copyir.com
    F109_3    Key consistency error: HDD encryption parameter damage  copyir.com
    F109_4    Key consistency error: license data damage  copyir.com
    F109_5    Key consistency error: Encryption key for ADI-HDD is damaged
    F109_6    Key consistency error: Administrator password error for ADI-HDD authentication  copyir.com
    F110    Communication error between System-CPU and Scanner-CPU
    F111    Scanner response abnormality
    F120    Database abnormality: Database is not operating normally  copyir.com
    F121    Database abnormality (user information management databaseکپی ایران
    F122    Database abnormality (Message/Job log management databaseکپی ایران
    F124    Database abnormality : Database is not operating normally  copyir.com (Language management databaseکپی ایران
    F130    Invaid MAC address
    F131    Error due to damage to filtering setting file
    F140    ASIC format error: ASIC formatting fails or memory acquiring fails when software is formatted  copyir.com
    F200    Data Overwrite option (GP-1070کپی ایران  disabled
    F350    SLG board abnormality
    F400    SYS board cooling fan abnormality
    F500    HD partition damage
    F510    Application start error
    F520    Operating system start error
    F521    Integrity check error
    F550    Encryption partition error
    F600    Software update error
    F700    Overwrite error
    F800    DaC010    Main motor abnormality: The main motor is not rotating normally
    C040    PFP motor abnormality: The PFP motor is not rotating normally
    C130    Upper drawer tray abnormality: The upper drawer tray motor is not rotating or the upper drawer tray is not moving normally  copyir.com
    C140    Lower drawer tray abnormality: The lower drawer tray motor is not rotating or the lower drawer tray is not moving normally
    C150    PFP upper drawer tray abnormality: The PFP upper drawer tray motor is not rotating or the PFP upper drawer tray is not moving normally
    C160    PFP lower drawer tray abnormality: The PFP lower drawer tray motor is not rotating or the PFP lower drawer tray is not moving normal
    C180    LCF tray-up motor abnormality: The LCF tray-up motor is not rotating or the LCF tray is not moving normally  copyir.com
    C1A0    LCF end fence motor abnormality: The LCF end fence motor is not rotating or the LCF end fence is not moving normally  copyir.com
    C1B0    LCF transport motor abnormality: The LCF transport motor is not rotating normally  copyir.com
    C260    Peak detection error: Lighting of the exposure lamp (white referenceکپی ایران  is not detected when power is turned ON  copyir.com
    C270    Carriage home position sensor not turning OFF within a specified period of time: The carriage does not shift from its home position in a specified period of time  copyir.com
    C280    Carriage home position sensor not turning ON within a specified period of time: The carriage does not reach to its home position in a specified period of time  copyir.com
    C290    Scanner fuse blowout: 24V power for the scanning system is not supplied at the scanner warming-up after power-ON  copyir.com
    C3D0    EPU board memory overwriting error: The overwriting of the EPU board memory fails  copyir.com
    C3D1    EPU board memory new parts detection error: The EPU board detects the process unit as a new unit when the equipment is started in the normal mode  copyir.com
    C3D2    EPU board memory old parts detection error: The EPU board cannot detect the new process unit when the equipment is started in the EPU replacement mode ([7] + [START]کپی ایران   copyir.com
    C410    Thermistor or heater abnormality at power-ON: Abnormality of service call the thermistor is detected when power is turned ON or the temperature of the fuser roller does not rise in a specified period of time after power is turned ON  copyir.com
    C430    Thermistor abnormality after abnormality judgment: Abnormality of the thermistor is detected after a specified period of time has passed from power-ON (including ready stateکپی ایران   copyir.com
    C440    Heater abnormality after abnormality judgment: The temperature of the fuser roller has exceeded the range of control or does not even reach the range  copyir.com
    C450    Thermistor abnormality during printing: Abnormality of the thermistor is detected during printing  copyir.com
    C4C0    Fuser unit new/old detection fuse abnormality
    C550    RADF I/F error: Communication error has occurred between the RADF and the scanner  copyir.com
    C551    Document feeder model detection error: An optional document feeder that is not compatible to this equipment is installed  copyir.com
    C570    Communication error between Engine-CPU and IPC board
    C580    Communication error between IPC board and finisher
    C5A0    EEPROM communication abnormality (LGC boardکپی ایران
    C8E0    ADF communication abnormality: The system has to be stopped because the control abnormality occurred
    C940    Engine-CPU abnormality
    C970    High-voltage transformer abnormality: Leakage of the main charger is detected  copyir.com
    CA10    Polygonal motor abnormality: The polygonal motor is not rotating normally  copyir.com
    CA20    H-Sync detection error: H-Sync detection PC board cannot detect laser beams  copyir.com
    CB00    Finisher not connected
    CB01    Finisher communication error
    CB10    Entrance motor abnormality: The entrance motor is not rotating normally  copyir.com [MJ-1101/MJ-1106]
    CB11    Buffer tray guide motor abnormality: The buffer tray guide motor is not rotating or the buffer tray guide is not moving normally  copyir.com [MJ-1101/MJ-1106]
    CB12    Buffer roller drive motor abnormality: The buffer roller drive motor is not rotating or the buffer roller is not moving normally  copyir.com [MJ-1101/MJ-1106]
    CB13    Finisher exit motor abnormality [MJ-1101/MJ-1106]
    CB14    Paper holding arm motor abnormality [MJ-1101/MJ-1106]
    CB30    Movable tray shift motor abnormality: The movable tray shift motor is not rotating or the movable tray is not moving normally  copyir.com [MJ-1101] Movable tray shift motor abnormality: The movable tray shift motor or the movable tray does not work properly  copyir.com [MJ-1032] Movable tray shift motor abnormality: The movable tray shift motor or the movable tray does not work properly  copyir.com [MJ-1033]
    CB31    Movable tray paper-full detection error: The actuator of the movable tray paper-full detection sensor does not move smoothly  copyir.com [MJ-1101/MJ-1106]
    CB40    Front alignment motor abnormality: The front alignment motor is not rotating or the front align/1106ment plate is not moving normally  copyir.com [MJ-1101] Front alignment plate home position detection error: The detection of the home position ends abnormally because the front alignment plate has not worked properly  copyir.com [MJ-1032/MJ-1033]
    CB50    Stapler home position error: The stapler home position sensor does not work  copyir.com [MJ-1101/MJ-1106] Stapler unit home position detection error: The detection of the home position of the stapler unit ends abnormally  copyir.com [MJ-1032/MJ-1033
    CB51    Stapler shift home position error: The stapler is not at the home position  copyir.com [MJ-1101/MJ-1106] Stapler unit sliding home position detection error: The detection of the home position of the stapler unit sliding ends abnormally  copyir.com [MJ-1032/MJ-1033]
    CB60    Stapler shift motor abnormality: Stapler shift motor is not rotating or staple unit is not moving normally  copyir.com [MJ-1101/MJ-1106]
    CB80    Backup RAM data abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON  copyir.com [MJ-1101/MJ-1106] EEPROM data abnormality: An error occurs during the writing of data into the EEPROM of the Finisher  copyir.com [MJ- 1032/MJ-1033]
    CB81    Flash ROM abnormality: Abnormality of checksum value on finisher controller PC board is detected when the power is turned ON  copyir.com [MJ-1101/MJ-1106]
    CB82    Finisher - Main CPU program error
    CB83    Saddle Stitch Finisher - Main CPU program error [MJ- 1106]
    CB84    Hole Punch Unit - Main CPU program error
    CB90    Paper pushing plate motor abnormality: Paper pushing plate motor is not rotating or paper pushing plate is not moving normally  copyir.com
    CB91    Saddle Stitch Finisher flash ROM abnormality [MJ-1106]
    CB92    Saddle Stitch Finisher RAM abnormality [MJ-1106]
    CB93    Additional folding motor abnormality [MJ-1106]
    CB94    Saddle transport motor abnormality [MJ-1106]
    CB95    Stacker motor abnormality [MJ-1106]
    CBA0    Front saddle stapler home position error: The stapler home position detection is abnormally operated and finished  copyir.com [MJ-1106]
    CBB0    Rear saddle stapler home position error: The stapler home position detection is abnormally operated and finished  copyir.com [MJ-1106]
    CBC0    Saddle Stitch Finisher side alignment motor (M15کپی ایران  abnormality: The alignment motor is not rotating or the alignment plate is not working properly  copyir.com [MJ- 1106]
    CBE0    Saddle Stitch Finisher folding motor (M17کپی ایران  abnormality: The folding motor is not rotating or the folding roller is not moving normally  copyir.com [MJ-1106]
    CBF0    Stacker motor (M9کپی ایران  abnormality : The stacker motor is not rotating  copyir.com [MJ-1033]
    CC01    A model not supporting the Finisher is connected  copyir.com Note that this error is recognized in the communication converter and is output  copyir.com
    CC02    Stack exit roller nip home position detection error: The detection of the home position of the stack exit roller nip ends abnormally  copyir.com [MJ-1032/MJ-1033]
    CC20    Saddle communication error [MJ-1106]
    CC21    The detection of the home position of the saddle stitch 3rd transport roller drive motor ends abnormally  copyir.com
    CC22    The detection of the home position of the saddle stitch stapler unit ends abnormally  copyir.com
    CC30    Stack transport motor abnormality: The stack transport motor is not rotating or the stack transport belt is not moving normally  copyir.com [MJ-1101/MJ-1106]
    CC31    Transport motor abnormality: The transport motor is not rotating or the stack transport roller -1 and -2 is not rotating normally  copyir.com [MJ-1101/MJ-1106]
    CC41    Paper holder cam home position abnormality: The paper holder cam is not at the home position  copyir.com [MJ- 1101]
    CC51    Sideways adjustment motor (M2کپی ایران  abnormality: Sideways adjustment motor is not rotating or puncher is not shifting normally  copyir.com [MJ-1101/MJ-1106 (when MJ-6103 is installedکپی ایران ]
    CC52    Skew adjustment motor (M1کپی ایران  abnormality: Skew adjustment motor is not rotating or puncher is not shifting normally  copyir.com [MJ-1101/MJ-1106 (when MJ- 6103 is installedکپی ایران ]
    CC53    An abnormality occurs in the punch waste full sensor  copyir.com
    CC54    Hole punch registration sensor detection error: An abnormality occurs in the hole punch registration sensor  copyir.com [MJ-1032/MJ-1033]
    CC60    Punch motor abnormality: Punch motor is not rotating or puncher is not shifting normally  copyir.com]
    CC61    Punch motor (M3کپی ایران  home position detection error: Punch motor is not rotating or puncher is not shifting normally  copyir.com [MJ-1101/MJ-1106 (when MJ-6103 is installedکپی ایران ]
    CC71    Punch ROM checksum error: Abnormality of checksum value on Hole punch controller PC board is detected when the power is turned on  copyir.com [MJ-1101/MJ-1106 (when MJ-6103 is installedکپی ایران ]
    CC72    Punch RAM read/write error: Abnormality of checksum value on Hole punch controller PC board is detected when the power is turned on  copyir.com [MJ-1101/MJ-1106 (when MJ-6103 is installedکپی ایران ]
    CC80    Rear alignment motor abnormality: The rear alignment motor is not rotating or the rear alignment plate is not moving normally  copyir.com [MJ-1101/MJ-1106] Rear alignment plate home position detection error: The detection of the home position ends abnormally because the rear alignment plate has not worked properly  copyir.com [MJ-1032/MJ-1033]
    CC91    The detection of the home position of the gripper arm ends abnormality  copyir.com
    CC92    The movable tray exceeds its upper limit  copyir.com
    CC93    Knurled roller shift solenoid abnormality: An abnormality occurs in the knurled roller shift solenoid  copyir.com [MJ-1032]
    CC94    1st fan motor abnormality: The 1st fan motor is locked abnormally  copyir.com [MJ-1032]
    CCF1    Tray safety switch abnormality - The tray safety switch turned on during tray operation (moving up or downکپی ایران   copyir.com
    CDE0    Paddle motor abnormality: The paddle motor does not rotate properly  copyir.com
    CDF0    Initialization error of the offset tray: The home position of the separator cannot be detected when the power is turned ON  copyir.com
    CE00    Communication error between finisher unit and puncher unit: Communication error between the finisher controller PC board and punch controller PC board  copyir.com
    CE50    Temperature/humidity sensor abnormality: The output value of this sensor is out of a specified range  copyir.com
    CE90    Drum thermistor abnormality: The output value of the drum thermistor-K is out of a specified range  copyir.com
    CF10    Communication module SRAM reading failure  copyir.com [MJ-1101]
    E010    Jam not reaching the exit sensor: The paper which has passed through the fuser unit does not reach the exit sensor  copyir.com
    E020    Stop jam at the exit sensor: The trailing edge of the paper does not pass the exit sensor after its leading edge has reached this sensor  copyir.com
    E030    Power-ON jam: The paper is remaining on the paper transport path when power is turned ON  copyir.com
    E061    Incorrect paper size setting for upper drawer: The size of paper in the 1st drawer differs from size setting of the equipment  copyir.com
    E062    Incorrect paper size setting for lower drawer: The size of paper in the 2nd drawer differs from size setting of the equipment  copyir.com
    E063    Incorrect paper size setting for PFP upper drawer: The size of paper in the 3rd drawer differs from size setting of the equipment  copyir.com
    E064    Incorrect paper size setting for PFP lower drawer: The size of paper in the 4th drawer differs from size setting of the equipment  copyir.com
    E065    Incorrect paper size setting for bypass tray: The size of paper in the bypass tray differs from size setting of the equipment
    E090    HDD abnormality causes jam: Image data to be printed cannot be prepared  copyir.com
    E110    ADU misfeeding (Paper not reaching the registration sensorکپی ایران : The paper which has passed through ADU does not reach the registration sensor during duplex printing
    E120    Bypass misfeeding (Paper not reaching the 1st transport sensorکپی ایران : The paper fed from the bypass tray does not reach the 1st transport sensor
    E130    Upper drawer misfeeding (Paper not reaching the 1st transport sensorکپی ایران : The paper fed from the upper drawer does not reach the 1st transport sensor  copyir.com
    E140    Lower drawer misfeeding (Paper not reaching the 2nd transport sensorکپی ایران : The paper fed from the lower drawer does not reach the 2nd transport sensor  copyir.com
    E150    PFP upper drawer misfeeding (Paper not reaching the PFP upper drawer feed sensorکپی ایران : The paper fed from the PFP upper drawer does not reach the PFP upper drawer feed sensor  copyir.com
    E160    PFP lower drawer misfeeding (Paper not reaching the PFP lower drawer feed sensorکپی ایران : The paper fed from the PFP lower drawer does not reach the PFP lower drawer feed senso
    E190    LCF misfeeding (Paper not reaching the LCF feed sensorکپی ایران : The paper fed from the LCF does not reach the LCF feed sensor  copyir.com
    E200    Upper drawer transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor
    E210    Lower drawer transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor
    E220    Lower drawer transport jam (Paper not reaching the 1st transport sensorکپی ایران : The paper does not reach the 1st transport sensor after it has passed the lower drawer feed sensor  copyir.com
    E270    Bypass transport jam (paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor  copyir.com
    E280    ADU transport jam (paper not reaching the registration sensorکپی ایران : The paper which has passed through ADU and the 1st transport sensor does not reach the registration sensor during duplex printing
    E300    PFP upper drawer transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor  copyir.com
    E310    PFP upper drawer transport jam (Paper not reaching the 1st transport sensorکپی ایران : The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor  copyir.com
    E320    PFP upper drawer transport jam (Paper not reaching the 2nd transport sensorکپی ایران : The paper does not reach the 2nd transport sensor after it has passed the PFP upper drawer feed sensor  copyir.com
    E330    PFP lower drawer transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor  copyir.com
    E340    PFP lower drawer transport jam (Paper not reaching the 1st transport sensorکپی ایران : The paper does not reach the 1st transport sensor after it has passed the PFP lower drawer feed sensor  copyir.com
    E350    PFP lower drawer transport jam (Paper not reaching the 2nd transport sensorکپی ایران : The paper does not reach the 2nd transport sensor after it has passed the PFP upper drawer feed sensor  copyir.com
    E360    PFP lower drawer transport jam (Paper not reaching the PFP upper drawer feed sensorکپی ایران : The paper does not reach the PFP upper drawer feed sensor after it has passed the PFP lower drawer feed sensor  copyir.com
    E3C0    LCF transport jam (Paper not reaching the registration sensorکپی ایران : The paper does not reach the registration sensor after it has passed the 1st transport sensor  copyir.com
    E3D0    LCF transport jam (Paper not reaching the 1st transport sensorکپی ایران : The paper does not reach the 1st transport sensor after it has passed the 2nd transport sensor  copyir.com
    E3E0    LCF transport jam (Paper not reaching the 2nd transport sensorکپی ایران : The paper does not reach the 2nd transport sensor after it has passed the LCF feed sensor  copyir.com
    E410    Front cover open jam: The front cover has opened during printing  copyir.com
    E420    PFP side cover open jam: The PFP side cover has opened during printing  copyir.com
    E430    ADU open jam: The ADU has opened during printing
    E440    Feed cover open jam: The feed cover has opened during printing  copyir.com
    E450    LCF side cover open jam: The LCF side cover has opened during printing  copyir.com
    E480    Bridge unit open jam: The bridge unit has opened during printing  copyir.com
    E490    Job separator cover open jam: The job separator cover has opened during printing  copyir.com
    E491    Offset tray cover open jam: The offset tray cover has opened during printing  copyir.com
    E510    Jam not reaching the ADU entrance sensor: The paper does not reach the ADU entrance sensor after it is switchbacked in the exit section  copyir.com
    E520    Stop jam in the ADU: The paper does not reach the ADU exit sensor after it has passed the ADU entrance sensor  copyir.com
    E550    Paper remaining jam on the transport path: The paper is remaining on the transport path when printing is finished (caused by a multiple paper feedingکپی ایران   copyir.com
    E570    Jam not reaching the reverse sensor: The paper which has passed the exit sensor does not reach the reverse sensor
    E580    Stop jam at the reverse sensor: The trailing edge of the paper does not pass the reverse sensor after its leading edge has reached this sensor
    E712    Jam not reaching the registration sensor: The original fed from the original feeding tray does not reach the registration sensor  copyir.com
    E714    Feed signal reception jam: The feed signal is received even no original exists on the original feeding tray  copyir.com
    E721    Jam not reaching the read sensor: The original does not reach the read sensor after it has passed the registration sensor (when scanning obverse sideکپی ایران  or the reverse sensor (when scanning reverse sideکپی ایران   copyir.com
    E722    Jam not reaching the exit sensor (during scanningکپی ایران : The original which passed the read sensor does not reach the exit sensor when it is transported from the scanning section to exit section  copyir.com
    E724    Stop jam at the registration sensor: The trailing edge of the original does not pass the registration sensor after its leading edge has reached this sensor  copyir.com
    E725    Stop jam at the read sensor: The trailing edge of the original does not pass the read sensor after its leading edge has reached this sensor  copyir.com
    E731    Stop jam at the exit sensor: The trailing edge of the original does not pass the exit sensor after its leading edge has reached this sensor  copyir.com
    E860    RADF jam access cover open: The RADF jam access cover has opened during RADF operation  copyir.com
    E870    RADF open jam: RADF has opened during RADF operation  copyir.com
    E871    Cover open jam in the read ready status: Jam caused by opening of the RADF jam access cover or front cover while the RADF is waiting for the scanning start signal from the equipment  copyir.com
    E910    Jam at the bridge unit transport sensor-1: The paper does not reach the bridge unit transport sensor-1 after it has passed the exit sensor  copyir.com
    E920    Stop jam at the bridge unit transport sensor-1: The trailing edge of the paper does not pass the bridge unit transport sensor-1 after its leading edge has reached the sensor  copyir.com
    E930    Jam at the bridge unit transport sensor-2: The trailing edge of the paper does not reach the bridge unit transport sensor-2 after its leading edge has reached the bridge unit transport sensor-1  copyir.com
    E940    Stop jam at the bridge unit transport sensor-2: The trailing edge of the paper does not reach the bridge unit transport sensor-2 after its leading edge has reached the bridge unit transport sensor-2  copyir.com
    E950    Jam not reaching the job separator transport sensor: The paper has passed through the exit sensor does not reach the job separator transport sensor  copyir.com
    E951    Stop jam at the job separator transport sensor: The trailing edge of the paper does not pass the job separator transport sensor
    E960    Jam not reaching the offset tray transport sensor: The paper has passed through the exit sensor does not reach the offset tray transport sensor  copyir.com
    E961    Stop jam at the offset tray transport sensor: The trailing edge of the paper does not pass the offset tray transport sensor  copyir.com
    E9F0    Punching jam: Punching is not performed properly  copyir.com [MJ-1025 (When MJ-6005 is installedکپی ایران ] Punching jam: Punching is not performed properly  copyir.com [MJ-1024 (when MJ-6004 is installedکپی ایران ] [MJ-1101 (when MJ-6101 is installedکپی ایران ]
    EA10    Paper transport delay jam: The paper which has passed the bridge unit does not reach the inlet sensor  copyir.com Paper transport delay jam: The paper which has passed the bridge unit does not reach the inlet sensor  copyir.com [MJ-1024/1031/1101]
    EA20    Paper transport stop jam: The paper does not pass through the inlet sensor  copyir.com [MJ-1025/MJ-1031] Paper transport stop jam: The paper has passed through the inlet sensor but does not reach or pass the feed path sensor or processing tray sensor  copyir.com [MJ-1024] Paper transport delay jam: The paper which has passed through the inlet sensor does not reach the transport sensor  copyir.com [MJ- 1101
    EA21    Paper size error jam: Paper does not reach the sensor because the paper is shorter than spec  copyir.com
    EA22    Paper transport jam (Finisher paper punching edge detection sensorکپی ایران
    EA23    Paper transport jam (exit sensorکپی ایران
    EA24    Paper transport jam (between entrance and exit sensorsکپی ایران
    EA25    Paper transport jam (after paper stack exitکپی ایران
    EA26    Paper transport jam (stop command requestکپی ایران
    EA27    Paper transport jam (paper not insertedکپی ایران
    EA28    Paper transport jam (assisting arm operation delayکپی ایران
    EA29    Paper transport jam (stack transport delayکپی ایران
    EA30    Power-ON jam: Paper exists at the inlet sensor when power is turned ON  copyir.com
    EA31    Transport path paper remaining jam
    EA32    Exit paper remaining jam
    EA40    Door open jam: The Finisher is released from the equipment or any of the staple door and top cover is opened during printing  copyir.com [MJ-1025] Door open jam: Any of the upper cover and front cover of the Finisher or any of the upper door and front door of the Hole Punch Unit is opened during printing  copyir.com [MJ-1024] Joint open jam: The joint is released during printing or in the standby status  copyir.com [MJ-1031]
    EA50    Stapling jam: Stapling is not performed properly  copyir.com
    EA60    Early arrival jam: The inlet sensor detects the paper earlier than a specified timing
    EA70    Stack delivery jam: It cannot deliver the stack of paper on the intermediary process tray to the stack tray  copyir.com [MJ-1025] Stack slider home position error: The stack slider is not at the home position  copyir.com [MJ-1031]
    EA80    Stapling jam: Stapling is not performed properly  copyir.com [MJ-1024]
    EA90    Door open jam: The delivery cover or inlet cover has opened during printing [MJ-1024/MJ-1101]  copyir.com
    EAA0    Power-ON jam: Paper exists at No  copyir.com1 paper sensor, No  copyir.com 2 paper sensor, No  copyir.com3 paper sensor, vertical path paper sensor or delivery sensor when power is turned ON  copyir.com [MJ-1024/MJ-1101]
    EAB0    Saddle paper transport stop jam: The paper which passed through the inlet sensor does not reach or pass through the folding position sensor  copyir.com [MJ-1025]
    EAC0    Saddle transport delay jam: The paper which has reached the inlet sensor does not pass through this sensor  copyir.com [MJ-1025/MJ-1024]
    EAD0    Print end command time-out jam: The printing has not finished normally because of the communication error between the SYS board and LGC board at the end of printing  copyir.com
    EAE0    Receiving time time-out jam: The printing has been interrupted because of the communication error between the equipment and finisher when the paper is transported from the equipment to the finisher  copyir.com
    EB30    Ready time time-out jam: The equipment judges that the paper transport to the finisher is disabled because of the communication error between the equipment and finisher at the start of printing  copyir.com
    EB50    Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper  copyir.com
    EB60    Paper remaining on the transport path: The multiple feeding of preceding paper caused the misfeeding of upcoming paper (redetection after no jam is detected at [EB50]کپی ایران   copyir.com
    ED10    Skew adjustment motor home position detection abnormality: The Skew adjustment motor is not at the home position  copyir.com [MJ-1101 (when MJ-6101 is installedکپی ایران ]
    ED11    Sideways adjustment motor home position detection error: The Sideways adjustment motor is not at the home position  copyir.com [MJ-1101 (when MJ-6101 is installedکپی ایران ]
    ED12    Shutter home position error: The shutter is not at the home position  copyir.com [MJ-1101]
    ED13    Front alignment plate home position error: The front alignment plate is not at the home position  copyir.com [MJ- 1101]
    ED14    Rear alignment plate home position error: The rear alignment plate is not at the home position  copyir.com [MJ- 1101]
    ED15    Paddle home position error: The paddle is not at the home position  copyir.com [MJ-1101]
    ED16    Buffer tray home position error: The buffer tray is not at the home position  copyir.com [MJ-1101]
    F070    Communication error between System-CPU and Engine- CPU
    F090    SRAM abnormality on the SYS board
    F100_0    HDD format error: Operation of HDD key data fails  copyir.com
    F100_1    HDD format error: Encryption key data of either the SYS board or the SRAM board for the SYS board are damaged  copyir.com
    F100_2    HDD format error: Encryption key data of both the SYS board and the SRAM board for the SYS board are damaged  copyir.com
    F101    The HDD cannot be connected (mountedکپی ایران  caused by a reason other than one described in the F101_0 through F101_3 errors  copyir.com
    F101_0    HDD connection error (HDD connection cannot be detected  copyir.comکپی ایران
    F101_1    Root partition mount error (HDD formatting fails  copyir.comکپی ایران : The HDD cannot be connected (mountedکپی ایران  caused by damage to the areas in which the program is mainly stored  copyir.com
    F101_2    Normal partition mount error (HDD normal partition mounting fails  copyir.comکپی ایران : The HDD cannot be connected (mountedکپی ایران  caused by damage to areas other than those described in the F101_0 and F101_1 errors  copyir.com
    F101_3    Encryption partition mount error (HDD encryption partition mounting fails  copyir.comکپی ایران : The HDD cannot be connected (mountedکپی ایران  caused by damage to the areas in which the key is stored  copyir.com
    F102    HDD start error: HDD cannot become ‘Ready’ state  copyir.com
    F103    HDD transfer time-out: Reading/writing cannot be performed in the specified period of time  copyir.com
    F104    HDD data error: Abnormality is detected in the data of HDD  copyir.com
    F105    HDD other error
    F106_0    ADI-HDD error: Illegal disk replacement detected (ADIHDD Exchange to SATA-HDDکپی ایران
    F106_1    ADI-HDD error: HDD type detection error
    F106_2    ADI-HDD error: ADI encryption key download operation error
    F106_3    ADI-HDD error: ADI authentication Admin Password generation error
    F106_4    ADI-HDD error: Authentication random number generation error
    F106_5    ADI-HDD error: Authentication data transmission error
    F109_0    Key consistency error: Consistency check operation error  copyir.com
    F109_1    Key consistency error: SRAM encryption AES key data damage  copyir.com
    F109_2    Key consistency error: Signature Check public key damage  copyir.com
    F109_3    Key consistency error: HDD encryption parameter damage  copyir.com
    F109_4    Key consistency error: license data damage  copyir.com
    F109_5    Key consistency error: Encryption key for ADI-HDD is damaged
    F109_6    Key consistency error: Administrator password error for ADI-HDD authentication  copyir.com
    F110    Communication error between System-CPU and Scanner-CPU
    F111    Scanner response abnormality
    F120    Database abnormality: Database is not operating normally  copyir.com
    F121    Database abnormality (user information management databaseکپی ایران
    F122    Database abnormality (Message/Job log management databaseکپی ایران
    F124    Database abnormality : Database is not operating normally  copyir.com (Language management databaseکپی ایران
    F130    Invaid MAC address
    F131    Error due to damage to filtering setting file
    F140    ASIC format error: ASIC formatting fails or memory acquiring fails when software is formatted  copyir.com
    F200    Data Overwrite option (GP-1070کپی ایران  disabled
    F350    SLG board abnormality
    F400    SYS board cooling fan abnormality
    F500    HD partition damage
    F510    Application start error
    F520    Operating system start error
    F521    Integrity check error
    F550    Encryption partition error
    F600    Software update error
    F700    Overwrite error
    F800    Date error
    F900    Model information error
    F901    Engine speed error: The speed information of the LGC board is damaged  copyir.com
    F901_1    Engine speed error: The speed information of the LGC board is damaged  copyir.com

te error
F900    Model information error
F901    Engine speed error: The speed information of the LGC board is damaged  copyir.com
F901_1    Engine speed error: The speed information of the LGC board is damaged  copyir.com

خواندن 1513 دفعه

نظر دادن

از پر شدن تمامی موارد الزامی ستاره‌دار (*) اطمینان حاصل کنید. کد HTML مجاز نیست.

نماد اعتماد

اطلاعات تماس

 آدرس: آذربایجان شرقی، مراغه، خیایان امام، روبروی داروخانه جاوید، ساختمان کپی ایران
شماره تماس: 04137252392   |    04137254200
شماره تماس: 04137253033   |   04137253034
شماره همراه: 09148659399
شماره فکس: 04136586892
پست الکترونیکی: این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید.این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید|این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت داریدساعات کاری: از 8 الی 22 شب