Your browser does not support JavaScript! > قیمت Canon MF4830

   کانال تلگرام کپی ایران

(0) محصول
پنج شنبه, 13 اسفند 1394 18:35

قیمت Canon MF4830

نوشته شده توسط
این مورد را ارزیابی کنید
(0 رای‌ها)

ایرادات دستگاهای کانون براساس کد می باشد شرکت کپی ایران در نظر داردتمامی سرویس منالها و رفع ایرادادت را در اختیار شما عزیزان قرار دهد

 

E000-0000    Fixing Assembly does not start up within specified time  copyir.com    When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies  copyir.com
(1) Check that the heater resistance measured between 1PIN and 2PIN of the cable (J101) on the Main Controller Board is in the following range  copyir.com Replace the Fixing Assembly when the resistance value is abnormal  copyir.com
[1] 100 V machine - Heater resistance: 12  copyir.com9 U ±7%
[2] 120 V machine - Heater resistance: 16  copyir.com0 U ±7%
[3] 230 V machines - Heater resistance: 53  copyir.com8 U ±7%
(2) Check the connection of connector (J101) on the Engine Controller Board  copyir.com
(3) Check the connection of connector (J552) on Engine Controller Board  copyir.com
(4) Replace the Fixing Assembly  copyir.com (5) Replace the Engine Controller Board  copyir.com
E001-0000    Abnormally high temperature (detected by main thermistor)
The main thermistor detected an abnormally high temperature 235 deg C) during temperature control    - When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies  copyir.com
(1) Check that the heater resistance measured between 1PIN and 2PIN of the cable (J101) on the Main Controller Board is in the following range  copyir.com Replace the Fixing Assembly when the resistance value is abnormal  copyir.com
[1] 100 V machine - Heater resistance: 12  copyir.com9 U ±7%
[2] 120 V machine - Heater resistance: 16  copyir.com0 U ±7%
[3] 230 V machines - Heater resistance: 53  copyir.com8 U ±7%
(2) Check the connection of connector (J101) on the Engine Controller Board  copyir.com
(3) Check the connection of connector (J552) on Engine Controller Board  copyir.com
(4) Replace the Fixing Assembly  copyir.com
(5) Replace the Engine Controller Board  copyir.com
E003-0000    Abnormal low-temperature detection    When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies  copyir.com
(1) Check that the heater resistance measured between 1PIN and 2PIN of the cable (J101) on the Main Controller Board is in the following range  copyir.com Replace the Fixing Assembly when the resistance value is abnormal  copyir.com
[1] 100 V machine - Heater resistance: 12  copyir.com9 U ±7%
[2] 120 V machine - Heater resistance: 16  copyir.com0 U ±7%
[3] 230 V machines - Heater resistance: 53  copyir.com8 U ±7%
(2) Check the connection of connector (J101) on the Engine Controller Board  copyir.com
(3) Check the connection of connector (J552) on Engine Controller Board  copyir.com
(4) Replace the Fixing Assembly  copyir.com
(5) Replace the Engine Controller Board  copyir.com
E004-0000    Fixing power supply drive circuit error    When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies  copyir.com
(1) Replace the Engine Controller Board  copyir.com
(2) Replace the Fixing Assembly  copyir.com
E100-0001    Error detection on any of scanner motor, laser unit, and BD detection at scanner area  copyir.com    When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies  copyir.com
(1) Replace the Laser Scanner Unit  copyir.com
(2) Replace the Engine Controller Board  copyir.com
E196-2000    ROM read/write error (Error in storing each setting values for user mode / service mode / factory mode)    When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies  copyir.com
(1) Update the set of the Controller Firmware
(2) Replace the Main Controller Board  copyir.com
E202-0002    Contact Sensor HP error, Failure in return    When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies  copyir.com
(1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor  copyir.com
(2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor  copyir.com
(3) Replace the Contact Sensor  copyir.com
(4) Replace the Main Controller Board  copyir.com
E225-0001    Light intensity of a lamp is less or equal to the criteria    When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies  copyir.com
(1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor  copyir.com
(2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor  copyir.com
(3) Replace the Contact Sensor  copyir.com (4) Replace the Main Controller Board  copyir.com
E301-0001    Insufficient light intensity in shading    When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies  copyir.com
(1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor  copyir.com
(2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor  copyir.com
(3) Replace the Contact Sensor  copyir.com
(4) Replace the Main Controller Board  copyir.com
E736-0000    Communication error with CCU/modem, or no FAX board installed on FAX model    When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies  copyir.com
(1) Check the connection of connectors between the Main Controller Board (J601, J602) and the FAXNCU Board (J1201, J1204)  copyir.com
(2) Replace the connectors between the Main Controller Board (J601, J602) and the FAX-NCU Board (J1201, J1204)  copyir.com
(3) Replace the FAX-NCU Board  copyir.com
(4) Replace the Main Controller Board  copyir.com
E740-0002    Error detection on either Network Board or Mac address    When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies  copyir.com
(1) Check the connection of the network cable  copyir.com
(2) Replace the Main Controller Board  copyir.com
E744-0002    Language file error    When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies  copyir.com Update the set of the Controller Firmware
E744-4000    Engine ID error (Invalid engine connection is detected)    When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies  copyir.com
(1) Check the Engine Controller Board  copyir.com
(2) Update the Engine Firmware  copyir.com
(3) Update the set of the Controller Firmware
E806-0000    Fan Motor cannot rotate at specified revolution speed    When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies  copyir.com
(1) Replace the Main Fan Unit  copyir.com
(2) Replace the Engine Controller Board  copyir.com

خواندن 2102 دفعه
محتوای بیشتر در این بخش: « کانون Canon MF4820 کانون Canon MF4870 »

نظرات (0)

نظر ارسال شده‌ی جدیدی وجود ندارد

دیدگاه خود را بیان کنید

  1. ارسال دیدگاه بعنوان یک مهمان -
پیوست ها (0 / 3)
اشتراک‌گذاری موقعیت مکانی شما

نماد اعتماد

اطلاعات تماس

 آدرس: آذربایجان شرقی، مراغه، خیایان امام، روبروی داروخانه جاوید، ساختمان کپی ایران
شماره تماس: 04137252392   |    04137254200
شماره تماس: 04137253033   |   04137253034
شماره همراه: 09148659399
شماره فکس: 04136586892
پست الکترونیکی: این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید.این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید|این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت داریدساعات کاری: از 8 الی 22 شب