Your browser does not support JavaScript! > کانونCanon iRC1021iF

   کانال تلگرام کپی ایران

(0) محصول
دوشنبه, 10 اسفند 1394 12:26

کانونCanon iRC1021iF

نوشته شده توسط
این مورد را ارزیابی کنید
(0 رای‌ها)

ایرادات دستگاهای کانون براساس کد می باشد شرکت کپی ایران در نظر داردتمامی سرویس منالها و رفع ایرادادت را در اختیار شما عزیزان قرار دهد

 

E000-0000    Error in start-up of fixing assembly
When 1 sec passed after energization of the heater, the detected temperature of the main thermistor is not 5 deg C or more (0 deg C at power on)   copyir.ocm    Disconnection of main thermistor, disconnection of fixing heater, error in DC controller PCB   copyir.ocm    - Check of the connector of the low-voltage power supply PCB - Replacement of fixing sleeve unit - Replacement of DC controller PCB
E001-0000    Error in overheating of fixing assembly
The status where the detected temperature of the main thermistor is 225 deg C (approx   copyir.ocm 0   copyir.ocm84V equivalent) or more is detected for 0   copyir.ocm5 continuous sec or more   copyir.ocm    Error in main thermistor, error in DC controller PCB   copyir.ocm    - Check of the connector of the low-voltage power supply PCB - Replacement of fixing sleeve unit - Replacement of DC controller PCB
E001-0001    Error in overheating of fixing assembly
The status where the detected temperature of the sub thermistor is 245 deg C (approx   copyir.ocm 2   copyir.ocm12V equivalent) or more is detected for 0   copyir.ocm5 continuous sec or more   copyir.ocm    Error in sub thermistor, error in DC controller PCB   copyir.ocm    - Check of the connector of the low-voltage power supply PCB - Replacement of fixing sleeve unit - Replacement of DC controller PCB
E003-0000    Error in abnormally low temperature of fixing assembly
The status where the detected temperature of the main thermistor is 100 deg C (approx   copyir.ocm 2   copyir.ocm60V equivalent) or less is detected for 0   copyir.ocm5 continuous sec or more   copyir.ocm    Error in low-voltage power supply PCB, disconnection of main thermistor, error in DC controller PCBor 20 msec   copyir.ocm    - Replacement of low-voltage power supply PCB - Replacement of fixing sleeve unit - Replacement of DC controller PCB
E003-0001    Error in abnormally low temperature of fixing assembly
The status where the detected temperature of the sub thermistor is less than 100 deg C (approx   copyir.ocm 0   copyir.ocm38V equivalent) is detected 0   copyir.ocm5 continuous sec or more after energization of the heater   copyir.ocm    Error in sub thermistor, error in DC controller PCB   copyir.ocm    - Check of the connector of the low-voltage power supply PCB - Replacement of fixing sleeve unit - Replacement of DC controller PCB
E004-0000    Error in fixing power supply drive circuit
Cannot detect the zero cross signal for the specified period or more   copyir.ocm    Error in fixing control circuit block   copyir.ocm    - Replacement of low-voltage power supply PCB
E012-0000    Error in activation of motor
When 3   copyir.ocm5 sec passed after activation of ETB motor, the cycle of ETB motor speed detection signal does not become its specified value   copyir.ocm    Error in ETB motor, error in DC controller PCB   copyir.ocm    - Replacement of ETB motor - Replacement of DC controller PCB
E012-0001    Error in activation of motor
After ETB motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more   copyir.ocm    Error in ETB motor, error in DC controller PCB    - Replacement of ETB motor - Replacement of DC controller PCB
E012-0002    Error in activation of motor Y
When 2   copyir.ocm5 sec passed after activation of the yellow drum motor, the cycle of drum motor speed detection signal does not become its specified value   copyir.ocm    Error in drum motor, error in DC controller PCB   copyir.ocm    - Replacement of drum motor - Replacement of DC controller PCB
E012-0003    Error in activation of motor Y
After the yellow drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more   copyir.ocm    Error in drum motor, error in DC controller PCB   copyir.ocm    - Replacement of drum motor - Replacement of DC controller PCB
E012-0004    Error in activation of motor M
When 2   copyir.ocm5 sec passed after activation of the magenta drum motor, the cycle of drum motor speed detection signal does not become its specified value   copyir.ocm    Cause Error in drum motor, error in DC controller PCB   copyir.ocm    - Replacement of drum motor - Replacement of DC controller PCB
E012-0005    Error in activation of motor M
After the magenta drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more   copyir.ocm    Error in drum motor, error in DC controller PCB   copyir.ocm    - Replacement of drum motor - Replacement of DC controller PCB
E012-0006    Error in activation of motor C
Description When 2   copyir.ocm5 sec passed after activation of the cyan drum motor, the cycle of the drum motor speed detection signal does not become its specified value   copyir.ocm    Error in drum motor, error in DC controller PCB   copyir.ocm    - Replacement of drum motor - Replacement of DC controller PCB
E012-0007    Error in activation of motor C
After the cyan drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more   copyir.ocm    Error in drum motor, error in DC controller PCB   copyir.ocm    - Replacement of drum motor - Replacement of DC controller PCB
E012-0008    Error in activation of motor Bk
When 2   copyir.ocm5 sec passed after activation of the black drum motor, the cycle of the drum motor speed detection signal does not become its specified value   copyir.ocm    Error in drum motor, error in DC controller PCB   copyir.ocm    - Replacement of drum motor - Replacement of DC controller PCB
E012-0009    Error in activation of motor Bk
After the black drum motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more   copyir.ocm    Error in drum motor, error in DC controller PCB   copyir.ocm    - Replacement of drum motor - Replacement of DC controller PCB
E014-0000    Error in activation of fixing motor
When 2   copyir.ocm5 sec passed after activation of fixing motor, the cycle of the fixing motor speed detection signal does not become its specified value   copyir.ocmor more   copyir.ocm    Error in fixing motor, error in DC controller PCB   copyir.ocm    - Replacement of fixing motor - Replacement of DC controller PCB
E014-0001    Error in activation of fixing motor
After the fixing motor speed detection signal became the specified value of the cycle, it exceeds the specified cycle for 2 continuous sec or more   copyir.ocmore   copyir.ocm    Error in fixing motor, error in DC controller PCB   copyir.ocm    - Replacement of fixing motor - Replacement of DC controller PCB
E015-0000    Failure in developing disengagement
Developing cylinder disengagement mechanism does not function correctly   copyir.ocm    Developing disengagement mechanism fault, developing disengagement solenoid fault, developing disengagement sensor fault, DC controller PCB fault   copyir.ocm    Check the developing disengagement mechanism   copyir.ocm Replace developing disengagement solenoid   copyir.ocm Replace developing disengagement sensor   copyir.ocm Replace DC controller PCB   copyir.ocm
E020-0000    Error in density sensor
Cannot receive enough light when detecting image density   copyir.ocm    Dirt on density sensor, error in density sensor, error in DC controller PCB, error in toner cartridge    - Replacement of ETB unit - Error in high-voltage joint (Check high-voltage joint for each color, and each joint to high-voltage PCB) - Replacement of DC controller - Replacement of toner cartridge
E024-0000    Toner level sensor failure
Failure output from the toner level sensor (Yellow)   copyir.ocm    Memory controller PCB assembly fault, DC controller PCB assembly fault, toner cartridge fault   copyir.ocm    - Replace toner cartridge - Replace memory controller PCB - Replace DC controller PCB
E024-0001    Toner level sensor failure
Failure output from the toner level sensor (Magenta)   copyir.ocm    Cause Memory controller PCB assembly fault, DC controller PCB assembly fault, toner cartridge fault   copyir.ocm    - Replace toner cartridge - Replace memory controller PCB - Replace DC controller PCB
E024-0002    Toner level sensor failure
Failure output from the toner level sensor (Cyan)   copyir.ocm    Memory controller PCB assembly fault, DC controller PCB assembly fault, toner cartridge fault   copyir.ocm    - Replace toner cartridge - Replace memory controller PCB - Replace DC controller PCB
E024-0003    Toner level sensor failure
Failure output from the toner level sensor (Black)   copyir.ocm    Memory controller PCB assembly fault, DC controller PCB assembly fault, toner cartridge fault   copyir.ocm    - Replace toner cartridge - Replace memory controller PCB - Replace DC controller PCB
E066-0000    Error in environment sensorbly
Failure in environment sensor   copyir.ocm    Environment sensor fault, DC controller PCB assembly fault   copyir.ocm    - Replace environment sensor - Replace DC controller PCB
E078-0000    Error in primary transfer estrangement unit
Primary transfer estrangement unit does not function properly   copyir.ocm    Terminal assembly fault, transfer roller estrangement solenoid fault, EBT unit fault, high-voltage power PCB assembly fault   copyir.ocm    - Replace ETB estrangement solenoid - Replace ETB unit - Terminal assembly fault (check on every contact between the terminals of each color and the high voltage PCB assembly)
E100-0000    Error in scanner motor, laser unit, BD
Yellow scanner assembly malfunction   copyir.ocm    Laser scanner unit fault, DC controller PCB assembly fault   copyir.ocm    - Replace laser scanner unit - Replace DC controller PCB
E100-0001    Error in scanner motor, laser unit, BD
Magenta scanner assembly malfunction   copyir.ocm    Laser scanner unit fault, DC controller PCB assembly fault   copyir.ocm    - Replace laser scanner unit - Replace DC controller PCB
E100-0002    Error in scanner motor, laser unit, BD
Cyan scanner assembly malfunction   copyir.ocm    Laser scanner unit fault, DC controller PCB assembly fault   copyir.ocm    - Replace laser scanner unit - Replace DC controller PCB
E100-0003    Error in scanner motor, laser unit, BD
Black scanner assembly malfunction   copyir.ocm    Laser scanner unit fault, DC controller PCB assembly fault   copyir.ocm    - Replace laser scanner unit - Replace DC controller PCB
E100-0004    Error in scanner motor, laser unit, BD
Failure output of a magenta BD signal    laser scanner unit fault, DC controller PCB fault   copyir.ocm    - Replace laser scanner unit - Replace DC controller PCB
E100-0005    Error in scanner motor, laser unit, BD
Failure output of a magenta BD signal    laser scanner unit fault, DC controller PCB fault   copyir.ocm    - Replace laser scanner unit - Replace DC controller PCB
E194-0000    Error in CPR sensor
Cannot detect color displacement detection pattern, detected results fall outside the acceptable range   copyir.ocm    Dirty color displacement detection sensor, color displacement detection sensor fault, DC controller PCB assembly fault, toner cartridge fault   copyir.ocm    Replace ETB unit - Terminal assembly fault (check on every contact between the terminals of each color and the high voltage PCB assembly) - Replace DC controller PCB - Replace toner cartridge
E196-0001    Error in DCON ROM
Updating the ROM on the DC controller PCB assembly has been failed   copyir.ocm        - Replace DC controller PCB
E197-0000    Internal communication error        - Replace DC controller PCB - Replace video controller PCB
E198-0000    DC controller memory malfunction
DC controller memory malfunction   copyir.ocm    DC controller PCB assembly fault   copyir.ocm    - Replace DC controller PCB assembly
E202-0001    Reader HP sensor fault
Reader HP outward fault   copyir.ocm    The CCD unit moves backward, but does not move to the home position   copyir.ocm    - Replace reader HP sensor   copyir.ocm - Replace reader motor sensor   copyir.ocm - Replace reader unit   copyir.ocm
E202-0002    Reader HP sensor fault
Reader HP homeward fault    The CCD unit moves forward, but does not move to the home position   copyir.ocm    - Replace reader HP sensor   copyir.ocm - Replace reader motor sensor   copyir.ocm - Replace reader unit   copyir.ocm
E225-0000    Error in light intensity of the lamp   copyir.ocm
Decrease of light intensity of the lamp   copyir.ocm        Replace reader unit   copyir.ocm
E248-0001    EEPROM access error
Error at EEPROM power-on    EEPROM data cannot be read at power-on   copyir.ocm    Replace reader unit   copyir.ocm
E248-0002    EEPROM access error
Error in EEPROM writing    EEPROM writing cannot be performed   copyir.ocm    Replace reader unit   copyir.ocm
E248-0003    EEPROM access error
Error in EEPROM reading after writing    EEPROM reading cannot be performed after writing is performed   copyir.ocm    Replace reader unit   copyir.ocm
E248-0004    EEPROM access error
Error in EEPROM register writing    EEPROM register writing cannot be performed   copyir.ocm    Replace reader unit   copyir.ocm
E351-0000    Main controller PCB fault
Internal error of the main controller PCB    Main controller PCB fault   copyir.ocm    - Check the connection of main controller PCB   copyir.ocm - Replace main controller PCB   copyir.ocm
E719-0000    Communication error of options
Erroneous communication with card reader (serial communication)    - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on)   copyir.ocm - A serial communication error has occurred   copyir.ocm (The serial communication error cannot be recovered   copyir.ocm)    - Check the connectors of the card reader and image processor PCB   copyir.ocm - Replace the card reader for normal connection   copyir.ocm - Replace the image processor PCB   copyir.ocm
E719-0002    Communication error of options
Erroneous communication with coin vendor (serial communication)    - Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on)   copyir.ocm - A serial communication error has occurred   copyir.ocm (The serial communication error cannot be recovered   copyir.ocm)    - Check the connection between the image processor PCB and serial PCB   copyir.ocm - Check the connectors of the serial PCB and coin vendor for normal connection   copyir.ocm - Replace the serial PCB   copyir.ocm - Check the coin vendor   copyir.ocm - Replace the image processor PCB   copyir.ocm
E744-0001    Language file/boot ROM/USB memory error
Language file version error    The language file version does not match Bootable   copyir.ocm    Download a language file of the correct version   copyir.ocm
E744-0002    Language file/boot ROM/USB memory error
Language file size error    The language file is longer than the permitted size   copyir.ocm    Download a language file of the correct version   copyir.ocm
E744-0003    Language file/boot ROM/USB memory error
Language file version error    The language file version does not match Bootable   copyir.ocm    Download a language file of the correct version   copyir.ocm
E744-0004    Language file/boot ROM/USB memory error
Language file read error    Reading of language file is invalid   copyir.ocm    Download a language file of the correct version   copyir.ocm
E804-0000    Error in power supply fan
The fan lock detection signal is input for about 10 sec or longer continuously   copyir.ocm    Power supply fault, DC controller PCB fault   copyir.ocm    - Replace the power supply fan - Replace the DC controller PCB
E805-0005    Error in duplexing fan/CPU fan
The duplexing fan lock detection signal is input for about 10 sec or longer continuously   copyir.ocm    Duplexing fan fault, DC controller PCB fault   copyir.ocm    - Replace the duplexing fan - Replace the DC controller PCB
E840-0000    Error in pressure release mechanism
Although passing 2   copyir.ocm5 sec from the start of HP control, HP (pressure condition) cannot be controlled   copyir.ocm    Fixing drive assembly fault, fixing pressure release cam fault   copyir.ocm    - Replace the fixing drive assembly - Replace the fixing pressure release cam

خواندن 1178 دفعه
محتوای بیشتر در این بخش: « کانون Canon iRC1021i کانون Canon iRC1022 »

نظر دادن

از پر شدن تمامی موارد الزامی ستاره‌دار (*) اطمینان حاصل کنید. کد HTML مجاز نیست.

نماد اعتماد

اطلاعات تماس

 آدرس: آذربایجان شرقی، مراغه، خیایان امام، روبروی داروخانه جاوید، ساختمان کپی ایران
شماره تماس: 04137252392   |    04137254200
شماره تماس: 04137253033   |   04137253034
شماره همراه: 09148659399
شماره فکس: 04136586892
پست الکترونیکی: این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید.این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید|این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت داریدساعات کاری: از 8 الی 22 شب