Your browser does not support JavaScript! > کیو سرا میتا fs1920

   کانال تلگرام کپی ایران

(0) محصول
دوشنبه, 06 ارديبهشت 1395 14:35

کیو سرا میتا fs1920

نوشته شده توسط
این مورد را ارزیابی کنید
(0 رای‌ها)
  • 0100    Engine board EEPROM (socket mount)
    Detecting EEPROM communication error     copyir.com    Improper installation EEPROM     copyir.com Defective engine board (KP-1081)     copyir.com
    0150    Engine board EEPROM (surface mount) error
    Detecting EEPROM communication error     copyir.com    Defective EEPROM or engine board (KP- 1081)     copyir.com
    0420    Optional paper feeder PF-60 communication error
    Communication error between engine board and optional paper feeder PF-60     copyir.com    Improper installation between printer and optional paper feeder     copyir.com Defective optional paper feeder PF- 60     copyir.com Defective engine board (KP-1081)     copyir.com
    0440    Optional sorter SO-60 communication error
    Communication error between engine board and optional sorter SO-60     copyir.com    Improper installation between printer and optional sorter SO- 60     copyir.com Defective optional sorter SO-60     copyir.com Defective engine board (KP-1081)     copyir.com
    0460    Optional duplexer DU-61 communication error
    Communication error between engine board and optional duplexer DU-61     copyir.com    Improper installation between printer and optional duplexer DU-61     copyir.com Defective optional duplexer DU-61     copyir.com Defective engine board (KP-1081)     copyir.com
    0550    Non-supported duplexer is installed
    Non-supported duplexer DU-60 is installede    DU-60 is installed     copyir.com
    0560    Paper feeder PF-60 [top] with wrong firmware version is installed
    The code that identifies the firmware version was out of range     copyir.com    Wrong firmware version is used on the main board in paper feeder PF-60     copyir.com
    0570    Paper feeder PF-60 [middle] with wrong firmware version is installed
    The code that identifies the firmware version was out of range     copyir.com Bulk paper feeder PF-8E with wrong firmware version is installed ·The code that identifies the firmware version was out of range     copyir.com    Wrong firmware version is used on the main board in paper feeder PF-60 or bulk paper feeder PF-8E     copyir.com
    0580    Paper feeder PF-60 [bottom] with wrong firmware version is installed
    The code that identifies the firmware version was out of range     copyir.com    Wrong firmware version is used on the main board in paper feeder PF-60     copyir.com
    1200    Optional duplexer DU-61 side registration error
    Side registration home position error of optional duplexer DU-61     copyir.com    Defective gate array U7 on the engine board (KP-1081)     copyir.com Improper installation between printer and optional duplexer, or each optional unit     copyir.com Defective harness (S03022) between engine board and optional unit interface connector     copyir.com Improper connector insertion     copyir.com Defective optional duplexer DU-61     copyir.com
    2000    Main motor error
    The main motor is overloaded    Overcurrent in the main motor circuitry due to an excessive torque     copyir.com Connector insertion error     copyir.com Defective gate array U7 on the engine board (KP- 1081)     copyir.com Defective harness between engine board and engine relay board (KP- 1071)     copyir.com Defective harness between engine relay board (KP- 1071) and main motor     copyir.com
    2600    Optional bulk paper feeder PF-8E motor error
    Motor error in the optional bulk paper feeder PF-8E     copyir.com    Defective harness (S03022) between engine board and optional unit interface connector     copyir.com Defective optional bulk paper feeder     copyir.com
    2610    Optional paper feeder PF-60 (Top) paper feed motor error
    Paper feed motor error in the top optional paper feederpap    Defective gate array U7 on the engine board (KP- 1081)     copyir.com Defective harness (S03022) between engine board and optional unit interface connector     copyir.com Defective paper feeder PF-60     copyir.com
    2620    Optional paper feeder PF-60 (Middle) paper feed motor error
    Paper feed motor error in the middle optional paper feeder     copyir.comD    Defective gate array U7 on the engine board (KP- 1081)     copyir.com Defective harness (S03022) between engine board and optional unit interface connector     copyir.com Defective optional paper feeder PF- 60     copyir.com
    2630    Optional paper feeder PF-60 (bottom) paper feed motor error
    Paper feed motor error in the bottom optional paper feeder     copyir.comD    Defective gate array U7 on the engine board (KP- 1081)     copyir.com Defective harness (S03022) between engine board and optional unit interface connector     copyir.com Defective paper feeder PF-60     copyir.com
    4000    Laser scanner unit (Polygon motor) error
    POLRDY* does not go low within 20 seconds after POLON* goes low (When starting) or within 16 seconds after REGPAP signal goes high (during printing)     copyir.com    Defective gate array U7 on the engine board     copyir.com Defective polygon motor     copyir.com Improper connector insertion     copyir.com Defective harness between laser scanner unit and engine board     copyir.com
    4200    Laser scanner unit (Pin photo diode sensor) error
    Laser beam detection failed     copyir.com The pin photo diode sensor [board] (KP-1075) does not deliver a horizontal synchronous signal (PD*)     copyir.com    No laser beam due to the laser diode defect (PD)     copyir.com Soiled or defective pin photo diode sensor     copyir.com Defective gate array U7 of engine board     copyir.com Improper connector insertion     copyir.com Defective harness between engine board and laser scanner unit     copyir.com
    5300    Eraser lamp error
    The ERADEAD* signal (delivered from the eraser lamp blown-out detection circuit on the engine board) goes low continuously more than 1 second, while eraser lamp is on     copyir.com    Blown-out eraser lamp [board KP- 1067]     copyir.com Defective CPU U1 on the engine board     copyir.com Improper connector insertion to the eraser lamp [board KP-1067]     copyir.com
    6000    Fuser unit error
    HTEMP remains high for longer than 4 seconds since the heater lamp is on     copyir.com The heater lamp continues to be turn on for longer than 60 seconds    Blown-out thermistor     copyir.com Blown-out heater lamp     copyir.com Defective CPU U1 or comparator U9 on the engine board     copyir.com Improper connector insertion     copyir.com Defective power supply unit     copyir.com Defective harness between fuser unit and power supply unit     copyir.com
    6020    Abnormal high temperature error
    HTEMP* remains high for longer than 4 seconds since the heater lamp is on     copyir.com The heater lamp continues to be turn on for longer than 60 seconds     copyir.com    Defective CPU U1 or comparator U9 on the engine board     copyir.com Defective engine board (KP-1081)     copyir.com Defective thermistor     copyir.com Defective photo coupler on the power supply unit for the heater lamp     copyir.com
    6030    Thermistor error
    The thermistor error signal was detected when the heater lamp was turned on     copyir.com    Defective thermistor     copyir.com Defective harness (S02678)     copyir.com Defective power supply unit     copyir.com Defective engine board (KP-1081)     copyir.com Defective fuser board (KP-1069)     copyir.com
    6400    Zero cross signal error
    The ZCROSS signal does not reach the engine board within 3 seconds after power on     copyir.com    Defective power supply unit     copyir.com Defective CPU U1 on the engine board     copyir.com
    7001    Toner motor error
    Toner motor is overloaded     copyir.com TNMOC is detected by sampling every other 100 ms in 2 seconds since the main and toner motors are activated following the Replace toner Clean printer message after the “Toner low” is detected     copyir.com    Overcurrent in the toner motor circuitry due to an excessive torque, caused by hardened toner     copyir.com Defective gate array U7 on the engine board     copyir.com Improper connector insertion     copyir.com Defective harness between developer and high voltage unit     copyir.com Defective harness between high voltage unit and engine board     copyir.com
    7350    Toner refreshing mode error    Defective high voltage unit     copyir.com Defective toner refreshing     copyir.com
    7400    The developer unit is not installed or not installed properly
    Failed to detect the voltage to identify the developer     copyir.com    The developer unit is not installed     copyir.com The developer connector is not properly inserted in the printer     copyir.com Defective developer unit     copyir.com Defective engine board (KP-1081)     copyir.com
    7410    The drum unit is not installed or not installed properly
    EEPROM communication error or the drum ID was not identified     copyir.com    The drum unit is not installed     copyir.com The drum unit connector is not properly inserted in the printer     copyir.com Defective drum unit     copyir.com Defective engine board (KP-1081)
    8000    Non-supported device is installed as an optional exit
    Serial communication detected that a non-supported bulk paper stacker HS-8E has been installed     copyir.com    A non-supported bulk paper stacker HS-8E is installed     copyir.com
    F0    Main board or LCD controller board error
    Communication is failed between the LCD controller board (KP-1079) and the main board     copyir.comhas    Defective system DIMM [board KP- 1059*1/893*2*3]     copyir.com Defective main board (KP-1053/ 1033)     copyir.com
    F010    System DIMM [board] error
    Checksum failed with system DIMM [board KP-1059/893] on the main board     copyir.com    LCD controller board (KP-1079)     copyir.com Defective system DIMM [board KP- 1059*1/893*2*3]     copyir.com Improper system DIMM [board KP- 1059*1/893*2*3] insertion to system DIMM slot on the main board (KP-1053/ 1033
    F020    Main or expanded memory error
    Checksum failed with main memory (RAM) on the main board or expanded memory (DIMM)     copyir.com    Defective system main memory (RAM) on the main board (KP- 1059*1/893*2*3)     copyir.com Defective main board (KP-1053/ 1033)     copyir.com Defective expanding memory (DIMM) on the main board (KP- 1053/1033)
    F040    Communication error
    Communication between the engine board and the main board is failed     copyir.com    Defective gate array (U02) on the main board     copyir.com Connector failure between the engine board (KP- 1081) and main board (KP-1053/ 1033)     copyir.com
    F070    Flash ROM error
    CPU U1 of engine board could not write data failed to flash ROM U2     copyir.com Write sequence to flash ROM is not successful     copyir.com Verify error     copyir.com (Written data does not match the original data     copyir.com)    Overrun in the engine system, deactivating the program flash ROM (U2) on the engine board (KP- 1081)     copyir.com Defective CPU U1 or gate array U7 or flash ROM U2 on the engine board (KP-1081)     copyir.com
خواندن 685 دفعه
محتوای بیشتر در این بخش: « کیو سرا میتا fs1900 کیو سرا میتا fs2000d »

نظر دادن

از پر شدن تمامی موارد الزامی ستاره‌دار (*) اطمینان حاصل کنید. کد HTML مجاز نیست.

نماد اعتماد

اطلاعات تماس

 آدرس: آذربایجان شرقی، مراغه، خیایان امام، روبروی داروخانه جاوید، ساختمان کپی ایران
شماره تماس: 04137252392   |    04137254200
شماره تماس: 04137253033   |   04137253034
شماره همراه: 09148659399
شماره فکس: 04136586892
پست الکترونیکی: این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید.این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید|این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت داریدساعات کاری: از 8 الی 22 شب