Your browser does not support JavaScript! > کیو سرا میتا km6330

   کانال تلگرام کپی ایران

(0) محصول
دوشنبه, 13 ارديبهشت 1395 09:34

کیو سرا میتا km6330

نوشته شده توسط
این مورد را ارزیابی کنید
(0 رای‌ها)

C0100    Backup memory read/write problem • Read and write data does not match       copyir.com    Defective backup RAM or main PCB       copyir.com
C0110    Backup memory data problem • Data in the specified area of the backup memory does not match the specified values       copyir.com    Problem with the backup memory data       copyir.com Defective backup RAM       copyir.com
C0210    Operation unit PCB communication problem • There is no reply after 20 retries at communication       copyir.com    Poor contact in the connector terminals       copyir.com Defective main PCB or operation unit left PCB       copyir.com
C0240    Printer PCB communication problem • There is no reply after 20 retries at communication       copyir.com    Poor contact in the connector terminals       copyir.com Defective main PCB or printer PCB       copyir.com
C0250    Network scanner PCB communication problem • There is no reply, in during regular communication from network scanner PCB to main PCB       copyir.com    Poor contact in the connector terminals       copyir.com Defective main PCB or network scanner PCB       copyir.com
C0420    Side deck communication problem • An error code from the side deck is detected eight times in succession       copyir.com No communication: there is no reply after 5 retries       copyir.com Abnormal communication: a communication error (parity or checksum error) is detected five times in succession       copyir.com    Poor contact in the connector terminals       copyir.com Defective engine PCB       copyir.comDefective main PCB       copyir.com Defective side deck main PCB       copyir.com
C0440    Finisher communication problem • Communication errors from the communication microcomputer on the main PCB: No communication: there is no reply after 5 retries       copyir.com Abnormal communication: a communication error (parity or checksum error) is detected five times in succession       copyir.com    Poor contact in the connector terminals       copyir.com Defective engine PCB       copyir.com Defective finisher main PCB       copyir.com
C0610    Bitmap (DIMM) problem • There is a problem with the data or address bus of the bitmap DRAM       copyir.com    Defective main PCB       copyir.com DIMM installed incorrectly       copyir.com Defective DIMM       copyir.com
C0630    DMA problem • DMA transmission of compressed, decompressed, rotated, relocated or blanked-out image data does not complete within the specified period of time       copyir.com    Defective main PCB       copyir.com
C0640    Hard disk drive problem • The hard disk drive cannot be accessed       copyir.com    Poor contact of the hard disk drive connector terminals       copyir.com Defective hard disk drive       copyir.com Defective main PCB       copyir.com
C1030    Upper lift motor problem • When the upper cassette is inserted, the upper lift limit switch does not turn on within 9 s of the upper lift motor turning on       copyir.com • During copying, the upper lift limit switch does not turn on within 200 ms of the upper lift motor turning on       copyir.com    Broken gears or couplings of the upper lift motor       copyir.com Defective upper lift motor       copyir.com Poor contact of the upper lift motor connector terminals       copyir.com Defective upper lift limit switch       copyir.com Poor contact of the upper lift limit switch connector terminals       copyir.com
C1040    Lower lift motor problem • When the lower cassette is inserted, the lower lift limit switch does not turn on within 9 s of the lower lift motor turning on       copyir.com • During copying, the lower lift limit switch does not turn on within 200 ms of the lower lift motor turning on       copyir.com    Broken gears or couplings of the lower lift motor       copyir.com Defective lower lift motor       copyir.com Poor contact of the lower lift motor connector terminals       copyir.com Defective lower lift limit switch       copyir.com Poor contact of the lower lift limit switch connector terminals       copyir.com
C1050    Large paper deck right lift motor problem • When the large paper deck is inserted, the large paper deck level switch 1 does not turn on within 30 s of the deck right lift motor turning on       copyir.com • During copying, the large paper deck level switch 1 does not turn on within 200 ms of the deck right lift motor turning on       copyir.com    Broken gear or coupling of the large paper deck right lift motor       copyir.com Defective large paper deck right lift motor       copyir.com Poor contact in the large paper deck right lift motor connector terminals       copyir.com Defective large paper deck level switch 1       copyir.com Poor contact in the large paper deck level switch 1 connector terminals       copyir.com
C1060    Large paper deck left lift motor problem • When the large paper deck is inserted, the large paper deck level switch 2 does not turn on within 30 s of the deck left lift motor turning on       copyir.com • During copying, the large paper deck level switch 2 does not turn on within 200 ms of the deck left lift motor turning on       copyir.com    Broken gear or coupling of the large paper deck left lift motor       copyir.com Defective large paper deck left lift motor       copyir.com Poor contact in the large paper deck left lift motor connector terminals       copyir.com Defective large paper deck level switch 2       copyir.com Poor contact in the large paper deck level switch 2 connector terminals       copyir.com
C1140    Side deck lift motor (going up) problem • When the side deck’s right cover is closed, the upper limit detection switch does not turn on within 17 s of the side deck lift motor turning on       copyir.com • When the upper limit detection switch detects edge of turning off signal, the upper limit detection switch does not turn on within 200 ms of the side deck lift motor turning on       copyir.com    Poor contact in the upper limit detection switch connector terminals       copyir.com Defective upper limit detection switch       copyir.com Defective side deck main PCB       copyir.com
C1150    Side deck lift motor (going down) problem • When the side deck’s right cover is closed, the lower limit detection switch does not turn on within 17 s of the side deck lift motor turning on       copyir.com • When the lower limit detection switch detects edge of turning off signal, the lower limit detection switch does not turn on within 200 ms of the side deck lift motor turning on       copyir.com    Poor contact in the lower limit detection switch connector terminals       copyir.com Defective lower limit detection switch       copyir.com Defective side deck main PCB       copyir.com
C2000    Image formation motor problem • LOCK ALM signal remains high for 1 s, 1 s after the image formation motor has turned on       copyir.com    Poor contact in the image formation motor connector terminals       copyir.com Defective image formation motor rotation control circuit       copyir.com Defective drive transmission system       copyir.com
C2500    Paper feed motor problem• LOCK DRIVE signal remains high for1 s, 1 s after the paper feed motorhas turned on       copyir.com    Poor contact inthe paper feedmotor connectorterminals       copyir.comDefective paperfeed motor rotationcontrol circuit       copyir.comDefective drivetransmission system       copyir.com
C2550    Drive motor problem• LOCK ALM signal remains high for 1s, 1 s after the drive motor has turnedon       copyir.com    Poor contact in the drive motor connector terminals       copyir.com Defective drive motor rotation control circuit       copyir.com Defective drive transmission system       copyir.com
C2640    Side deck drive motor problem • SDDM ALM signal remains high for 1 s, 1 s after the side deck drive motor has turned on       copyir.com    Poor contact in the side deck drive motor connector terminals       copyir.com Defective side deck drive motor rotation control circuit       copyir.com Defective drive transmission system       copyir.com
C3100    Scanner carriage problem • The home position is not correct when the power is turned on or copying the document placed on the contact glass       copyir.com    Poor contact of the connector terminals       copyir.com Defective scanner home position switch       copyir.com Defective engine PCB or scanner motor PCB       copyir.com Defective scanner motor       copyir.com
C3300    Optical system (AGC) problem • After AGC, correct input is not obtained at CCD       copyir.com    Insufficient exposure lamp luminosity       copyir.com Defective main PCB       copyir.com Incorrect shading position       copyir.com CCD PCB output problem       copyir.com
C4000    Polygon motor synchronization problem • The polygon motor does not reach the stable speed within 10 s of the START signal turning on       copyir.com    Poor contact in the polygon motor connector terminals       copyir.com Defective polygon motor       copyir.com Defective power source PCB       copyir.com Defective junction B PCB       copyir.com
C4010    Polygon motor steady-state problem • The polygon motor rotation is not stable for 600 ms after the polygon motor rotation has been stabilized       copyir.com    Poor contact in the polygon motor connector terminals       copyir.com Defective polygon motor       copyir.com Defective power source PCB       copyir.com Defective junction B PCB       copyir.com
C4100    BD initialization (A) problem • When power is turned on, only laser A is output and MIP detects a BD error for 600 ms       copyir.com    Defective laser scanner unit       copyir.com Defective main PCB       copyir.com
C4110    BD initialization (B) problem • When power is turned on, only laser B is output and MIP detects a BD error for 600 ms       copyir.com    Defective laser scanner unit       copyir.com Defective main PCB       copyir.com
C4200    BD steady-state problem • The MIC detects a BD error for 600 ms after the polygon motor rotation has been stabilized       copyir.com    Defective laser diode       copyir.com Defective polygon motor       copyir.com Defective main PCB       copyir.com
C5100    Main charger problem • MC ALM signal is detected continuously for 400 ms when MC REM signal is turned on       copyir.com    Leakage during main charging       copyir.com Defective high voltage transformer PCB       copyir.com
C5500    Drum surface potential sensor problem 1 • The sensor output is 0       copyir.com5 V or less when MC REM signal is turned on       copyir.com    Poor contact inthe drum surfacepotential sensorconnector terminals       copyir.com Defective drumsurface potentialsensor       copyir.com Defective enginePCB       copyir.com Defective highvoltage transformerPCB       copyir.com
C5510    Drum surface potential sensor problem 2 • The sensor output is 4       copyir.com5 V or more when the MC REM signal is turned on       copyir.com    Defective drum surface potential sensor       copyir.com
C5600    Drum surface potential problem 1 • Maximizing the grid output cannot set the potential       copyir.com    Deteriorated main charger       copyir.com Grid or main charger shield is dirty       copyir.com Defective high voltage transformer PCB       copyir.com Defective engine PCB       copyir.com
C5610    Drum surface potential problem 2 • Minimizing the grid output cannot set the potential       copyir.com    Defective high voltage transformer PCB       copyir.com
C6000    Broken fixing heater wire • The fixing temperature does not increase for 40 s after the fixing heaters have been turned on for warming up       copyir.com • The fixing temperature remains below 50°C/122°F for 10 s continuously after the fixing heaters have been turned on during stabilization       copyir.com    Poor contact in the fixing unit thermistor connector terminals       copyir.com Fixing unit thermistor installed incorrectly       copyir.com Fixing unit thermostat triggered       copyir.com Fixing heater M and S installed incorrectly       copyir.com Broken fixing heater M and S wire       copyir.com
C6020    Abnormally high fixing unit thermistor temperature • The fixing temperature exceeds 230C/464F for 10 s       copyir.com • The fixing unit temperature detection circuit on the engine PCB detects and abnormally high temperature       copyir.com    Shorted fixing unit thermistor       copyir.com Broken fixing heater control circuit on the power source PCB       copyir.com
C6030    Broken fixing unit thermistor • The fixing temperature remains at 0C/32F for 30 s continuously when the fixing heater is on       copyir.com    Poor contact in the fixing unit thermistor connector terminals       copyir.com Broken fixing unit thermistor wire       copyir.com
C6050    Abnormally low fixing unit thermistor temperature • The fixing temperature remains below 120C/248F for 10 s       copyir.com    Poor contact in the fixing unit thermistor connector terminals       copyir.com Broken fixing unit thermistor wire       copyir.com Fixing unit thermistor installed incorrectly       copyir.com Fixing unit thermostat triggered       copyir.com Fixing heater M and S installed incorrectly       copyir.com Broken fixing heater M and S wire       copyir.com
C6400    Zero-crossing signal problem • The main PCB does not detect the zero-crossing signal (Z CROSS SIG) for the time specified below       copyir.com At power-on: 3 s Others: 5 s    Poor contact in the connector terminals       copyir.com Defective power source PCB       copyir.com Defective main PCB       copyir.com
C7100    Toner sensor problem • The toner sensor output voltage is outside the range of 0       copyir.com5 to 4       copyir.com5 V during copying or in maintenance item U130       copyir.com • The toner sensor control voltage cannot be set within the range in maintenance item U130       copyir.com    Defective toner sensor       copyir.com Poor contact in the toner sensor connector terminals       copyir.com Defective developer       copyir.com
C7300    Toner hopper problem • Toner level is not detected when toner empty is detected       copyir.com    Defective toner level detection sensor       copyir.com Poor contact in the toner level detection sensor connector terminals       copyir.com
C7500    Broken drum thermistor wire • The drum thermistor input voltage is 4       copyir.com5 V or more when the front cover is closed       copyir.com    Broken drum thermistor wire       copyir.com Poor contact in the drum thermistor connector terminals       copyir.com
C7520    Shorted drum thermistor • The drum thermistor input voltage is 1       copyir.com2 V or less when the front cover is closed       copyir.com    Broken drum thermistor wire       copyir.com Defective main PCB       copyir.com
C7530    Broken drum heater wire • The drum temperature does not change within 5 minutes of the drum heater turning on       copyir.com    Broken drum heater wire       copyir.com Poor contact in the drum heater connector terminals       copyir.com
C7800    Broken external temperature thermistor • The input voltage is 4       copyir.com5 V or more       copyir.com    Poor contact in the humidity sensor PCB connector terminals       copyir.com Defective external temperature thermistor       copyir.com
C7810    Short-circuited external temperature thermistor • The input voltage is 0       copyir.com5 V or less       copyir.com    Poor contact in the humidity sensor PCB connector terminals       copyir.com Defective external temperature thermistor       copyir.com
C8010    Paper conveying motor problem • The LOCK signal of the paper conveying motor is detected for more than 500 ms while the paper conveying motor is operating       copyir.com However, the first 1 s after the paper conveying motor is turned on is excluded from detection       copyir.com    Loose connection of the paper conveying motor connector       copyir.com Defective paper conveying motor       copyir.com Defective finisher main PCB       copyir.com
C8020    Punch motor problem • The LOCK signal of the punch motor is detected for more than 500 ms while the punch motor is operating       copyir.com However, the first 1 s after the punch motor is turned on is excluded from detection       copyir.com    Loose connection of the punch motor connector       copyir.com Defective punch motor       copyir.com Defective finisher main PCB       copyir.com
C8030    Upper paper conveying belt problem • During initialization, the intermediate tray upper sliding plate is not detected in the home position within 3 s after the belt returns to the home position       copyir.com JAM87 is indicated the first time this problem occurs       copyir.com If the problem reoccurs after initialization when the front cover is opened and closed, the problem is in the upper paper conveying belt       copyir.com • When the intermediate tray upper sliding plate is operated from the home position, the upper paper conveying belt home position sensor does not turn off within 1 s       copyir.com    Phase shift of the upper paper conveying belt       copyir.com Malfunction of the upper paper conveying belt motor       copyir.com Malfunction of the upper paper conveying belt home position sensor       copyir.com Loose connection of the upper paper conveying belt home position sensor connector       copyir.com Incorrect insertion of the intermediate tray       copyir.com Defective finisher main PCB       copyir.com
C8040    Lower paper conveying belt problem • During initialization, the intermediate tray lower sliding plate is not detected in the home position within 3 s after the belt returns to the home position       copyir.com JAM87 is indicated the first time this problem occurs       copyir.com If the problem reoccurs after initialization when the front cover is opened and closed, the problem is in the lower paper conveying belt       copyir.com • When the intermediate tray lower sliding plate is operated from the home position, the lower paper conveying belt home position sensor does not turn off within 1 s       copyir.com    Phase shift of the lower paper conveying belt       copyir.com Malfunction of the lower paper conveying belt motor       copyir.com Malfunction of the lower paper conveying belt home position sensor       copyir.com Loose connection of the lower paper conveying belt home position sensor connector       copyir.com Incorrect insertion of the intermediate tray       copyir.com Defective finisher main PCB       copyir.com
C8140    Main tray problem • When the main tray is not detected by the main tray upper limit detection sensor or the main tray load detection sensor within 20 s from the moment it starts ascending       copyir.com • During main tray descent, the main tray upper limit detection sensor or the main tray load detection sensor does not turn off within 500 ms after it turns on       copyir.com • During main tray ascent, the main tray upper limit detection sensor or the main tray load detection sensor stays on for more than 2 s       copyir.com    Loose connection of the main tray elevation motor connector       copyir.com Malfunction of the main tray elevation motor       copyir.com Malfunction of the main tray upper limit detection sensor       copyir.com Loose connection of the main tray upper limit detection sensor connector       copyir.com Malfunction of the main tray load detection sensor       copyir.com Loose connection of the main tray load detection sensor connector       copyir.com Defective finisher main PCB       copyir.com
C8150    Multi job tray problem • When the multi job tray is not detected by the multi job tray upper limit detection sensor within 15 s from the moment it starts ascending       copyir.com • During multi job tray descent, the multi job tray upper limit detection sensor does not turn off within 500 ms after it turns on       copyir.com    Loose connection of the multi job tray elevation motor connector       copyir.com Malfunction of the multi job tray elevation motor       copyir.com Malfunction of the multi job tray upper limit detection sensor       copyir.com Loose connection of the multi job tray upper limit detection sensor connector       copyir.com
C8170    Front upper side-registration guide problem • During initialization, the front upper side-registration guide is not detected in the home position within 1       copyir.com5 s after the guide returns to the home position       copyir.com JAM87 is indicated the first time this problem occurs       copyir.com If the problem occurs after initialization when the front cover is opened and closed, the problem is in the front upper side-registration guide       copyir.com • When the front upper side-registration guide is operated from the home position, the front upper sideregistration home position sensor does not turn off within 500 ms       copyir.com    Loose connection of the front upper side-registration guide motor connector       copyir.com Malfunction of the front upper sideregistration guide motor       copyir.com Malfunction of the front upper sideregistration guide home position sensor       copyir.com Loose connection of the front upper side-registration guide home position sensor connector       copyir.com Defective finisher main PCB       copyir.com
C8180    Rear upper side-registration guide problem • During initialization, the rear upper side-registration guide is not detected in the home position within 1       copyir.com5 s after the guide returns to the home position       copyir.com JAM87 is indicated the first time this problem occurs       copyir.com If the problem occurs after initialization when the front cover is opened and closed, the problem is in the rear upper side-registration guide       copyir.com • When the rear upper side-registration guide is operated from the home position, the rear upper sideregistration home position sensor does not turn off within 500 ms       copyir.com    Loose connection of the rear upper side-registration guide motor connector       copyir.com Malfunction of the rear upper sideregistration guide motor       copyir.com Malfunction of the rear upper sideregistration guide home position sensor       copyir.com Loose connection of the rear upper side-registration guide home position sensor connector       copyir.com Defective finisher main PCB       copyir.com
C8190    Lower side-registration guide problem • During initialization, the front/rear lower side-registration guides are not detected in the home position within 1       copyir.com5 s after the guide returns to the home position       copyir.com JAM87 is indicated the first time this problem occurs       copyir.com If the problem occurs after initialization when the front cover is opened and closed, the problem is in the lower side-registration guide       copyir.com • When the lower side-registration guide is operated from the home position, the lower side-registration home position sensor does not turn off within 500 ms       copyir.com    Loose connection of the lower sideregistration guide motor connector       copyir.com Malfunction of the lower sideregistration guide motor       copyir.com Malfunction of the lower sideregistration guide home position sensor       copyir.com Loose connection of the lower sideregistration guide home position sensor connector       copyir.com Defective finisher main PCB       copyir.com
C8210    Front stapler problem • During initialization, the front stapler is not detected in the home position within 500 ms after the front stapler returns to the home position       copyir.com JAM90 is indicated the first time this problem occurs       copyir.com If the problem occurs after initialization when the front cover is opened and closed, the problem is in the front stapler       copyir.com • When the front stapler is operated from the home position, the front stapler home position sensor does not turn off within 500 ms       copyir.com    Loose connection of the front stapler motor connector       copyir.com Malfunction of the front stapler motor       copyir.com Malfunction of the front stapler home position sensor       copyir.com Loose connection of the front stapler home position sensor connector       copyir.com Defective finisher main PCB       copyir.com
C8220    Front clincher problem • During initialization, the front clincher is not detected in the home position within 500 ms after the front clincher returns to the home position       copyir.com JAM90 is indicated the first time this problem occurs       copyir.com If the problem occurs after initialization when the front cover is opened and closed, the problem is in the front clincher       copyir.com • When the front clincher is operated from the home position, the front clincher home position sensor does not turn off within 500 ms       copyir.com    Loose connection of the front clincher motor connector       copyir.com Malfunction of the front clincher motor       copyir.com Malfunction of the front clincher home position sensor       copyir.com Loose connection of the front clincher home position sensor connector       copyir.com Defective finisher main PCB       copyir.com
C8230    Rear stapler problem • During initialization, the rear stapler is not detected in the home position within 500 ms after the rear stapler returns to the home position       copyir.com JAM90 is indicated the first time this problem occurs       copyir.com If the problem occurs after initialization when the front cover is opened and closed, the problem is in the rear stapler       copyir.com • When the rear stapler is operated from the home position, the rear stapler home position sensor does not turn off within 500 ms       copyir.com    Loose connection of the rear stapler motor connector       copyir.com Malfunction of the rear stapler motor       copyir.com Malfunction of the rear stapler home position sensor       copyir.com Loose connection of the rear stapler home position sensor connector       copyir.com Defective finisher main PCB       copyir.com
C8240    Rear clincher problem • During initialization, the rear clincher is not detected in the home position within 500 ms after the rear clincher returns to the home position       copyir.com JAM90 is indicated the first time this problem occurs       copyir.com If the problem occurs after initialization when the front cover is opened and closed, the problem is in the rear clincher       copyir.com • When the rear clincher is operated from the home position, the rear clincher home position sensor does not turn off within 500 ms       copyir.com    Loose connection of the rear clincher motor connector       copyir.com Malfunction of the rear clincher motor       copyir.com Malfunction of the rear clincher home position sensor       copyir.com Loose connection of the rear clincher home position sensor connector       copyir.com Defective finisher main PCB       copyir.com

خواندن 1393 دفعه
محتوای بیشتر در این بخش: « کیو سرا میتا km6230 کیو سرا میتا km7530 »

نظر دادن

از پر شدن تمامی موارد الزامی ستاره‌دار (*) اطمینان حاصل کنید. کد HTML مجاز نیست.

نماد اعتماد

اطلاعات تماس

 آدرس: آذربایجان شرقی، مراغه، خیایان امام، روبروی داروخانه جاوید، ساختمان کپی ایران
شماره تماس: 04137252392   |    04137254200
شماره تماس: 04137253033   |   04137253034
شماره همراه: 09148659399
شماره فکس: 04136586892
پست الکترونیکی: این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید.این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید|این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت داریدساعات کاری: از 8 الی 22 شب