Your browser does not support JavaScript! > کیو سرا میتا taskalfa 180

   کانال تلگرام کپی ایران

(0) محصول
دوشنبه, 13 ارديبهشت 1395 17:35

کیو سرا میتا taskalfa 180

نوشته شده توسط
این مورد را ارزیابی کنید
(0 رای‌ها)

A0410    Document processor communication problem Communication fails five times succes-sively      copyir.com    Document processor installed incorrectly      copyir.com
Defective PWB
A0420    First paper feeder communication problem
Communication fails five times successively      copyir.com    First paper feeder installed incorrectly      copyir.com
Defective PWB
A0500    Second paper feeder communication problem
Communication fails five times succes-sively    Second paper feeder installed incorrectly      copyir.com
Defective PWB
A0510    Third paper feeder communication problem
Communication fails five times succes-sively      copyir.com    Third paper feeder installed incorrectly      copyir.com
Defective PWB
C0100    Backup memory (EEPROM) device problem (main)
Reading from or writing to EEPROM cannot be performed      copyir.com    Defective main/ engine PWB      copyir.com
C0110    Backup memory data problem (main)
Data in the specified area of the backup memory does not match the specified values      copyir.com    Data damage of EEPROM      copyir.com
C0150    Backup memory device problem (engine EEPROM)
Reading from or writing to EEPROM cannot be performed    Defective main/ engine PWB      copyir.com
Device damage of EEPROM      copyir.com
C0160    Backup memory data problem (engine EEPROM)
Reading data from EEPROM is abnormal      copyir.com    Data damage of EEPROM      copyir.com
C0170    Copy counts problem
When the power is turned on, the total count and the scan count are abnormal both on the main and engine      copyir.com    Data damage of EEPROM      copyir.com
Defective main/ engine PWB      copyir.com
C0180    Machine number mismatch
Machine number of main and engine does not match      copyir.com    Data damage of EEPROM      copyir.com
C0210    Communication problem between the main and engine
When the power is turned on, the machine does not detect the low level of SBSY and the high level of SDIR for 10 s      copyir.com    Poor contact in the connector terminals      copyir.com
Defective main/ engine PWB      copyir.com
C0240    Printer PWB communication problem
The printer PWB does not respond 120 s after the power is turned on      copyir.com    Poor contact in the connector terminals      copyir.com
Defective main/ engine PWB      copyir.com
C0610    Bitmap (DIMM) problem
There is a problem with the data or address bus of the bitmap DRAM      copyir.com    Defective main/ engine PWB      copyir.com
DIMM installed incorrectly      copyir.com
Defective DIMM      copyir.com
C0620    Memory input interface problem
Reading-in of an image does not complete within 10 s of the start of image transmission      copyir.com    Defective main/ engine PWB      copyir.com
C0630    DMA problem
DMA transmission of compressed, decompressed, rotated, relocated or blanked-out image data does not complete within the specified period of time      copyir.com    Defective main/ engine PWB      copyir.com
C0800    Image processing problem
JAM05 is detected twice      copyir.com    Defective main/ engine PWB      copyir.com
C2000    Drive motor problem
A stable state does not continue for 1 s from 1 s after the drive motor is activated      copyir.com    Poor contact in the connector terminals      copyir.com
Defective drive transmission system      copyir.com
Defective main/ engine PWB      copyir.com
Defective drive motor      copyir.com
C2200    Drum motor problem
A stable state does not continue for 1 s from 1 s after the drum motor is activated      copyir.com    Poor contact in the connector terminals
Defective drive transmission system      copyir.com
Defective main/ engine PWB      copyir.com
Defective drum motor      copyir.com
C3100    Scanner carriage problem
The home position is not correct when the power is turned on or at the start of copying using the table      copyir.com    Poor contact in the connector terminals      copyir.com
Defective home position switch
Defective scanner motor
The mirror frame, exposure lamp, or scanner wire is defective
Defective main/ engine PWB      copyir.com
C3200    Exposure lamp problem
Non-lighting of the exposure lamp is detected at the beginning of copying      copyir.com    Poor contact in the connector terminals      copyir.com
Defective exposure lamp      copyir.com
Incorrect shading position      copyir.com
Defective PWB
C3300    AGC problem
After AGC, correct input is not obtained at CCD    Poor contact in the connector terminals
Defective exposure lamp      copyir.com
Defective PWB
C4000    Polygon motor synchronization problem
The polygon motor does not reach the stable speed within 20 s of the START signal turning on      copyir.com    Poor contact in the connector terminals
Defective polygon motor      copyir.com
Defective main/ engine PWB
C4010    Polygon motor steady-state problem
Stable OFF is detected for 5 s continuously after polygon motor stability      copyir.com    Poor contact in the connector terminals      copyir.com
Defective polygon motor      copyir.com
Defective main/ engine PWB      copyir.com
C4200    BD steady-state problem
ASIC detects a BD error for 600 ms after the polygon motor rotation has been stabilized      copyir.com    Poor contact in the connector terminals
Defective laser scanner unit      copyir.com
Defective main/ engine PWB
C6000    Fuser heater break
The temperature does not reach 70 °C/ 158°F in 15 s before secondary stabilization      copyir.com
Temperature rise of 1°C/1      copyir.com8°F does not occur in 5 s before secondary stabilization (except during printing)      copyir.com    Poor contact in the fuser thermistor connector terminals      copyir.com
Fuser thermistor installed incorrectly      copyir.com
Fuser thermostat triggered      copyir.com
Fuser heater installed incorrectly      copyir.com
Broken fuser heater wire      copyir.com
C6020    Abnormally high fuser thermistor temperature
Fuser thermistor is detected 230°C/ 446°F or more for 40 ms      copyir.com    Shorted thermistor      copyir.com
Broken heater control circuit on the power source PWB
C6050    Abnormally low fuser thermistor temperature
Fuser thermistor remains below 90°C/ 194°F for 1 s      copyir.com    Poor contact in the fuser thermistor connector terminals      copyir.com
Broken fuser thermistor wire      copyir.com
Fuser thermistor installed incorrectly      copyir.com
Fuser thermostat triggered      copyir.com
Fuser heater installed incorrectly      copyir.com
Broken fuser heater wire      copyir.com
C6400    Zero-cross signal error
Interrupt of the zero-cross signal does not occur more than 1 s      copyir.com    Poor contact in the connector terminals
Defective power source PWB      copyir.com
Defective main/ engine PWB      copyir.com
C7800    Broken external thermistor wire
The thermistor output value is 0      copyir.com5 V or less      copyir.com    Poor contact in the connector terminals      copyir.com
Defective humidity sensor      copyir.com
C7810    Short-circuited external thermistor wire
The thermistor output value is 4      copyir.com5 V or more      copyir.com    Poor contact in the connector terminals      copyir.com
Defective humidity sensor      copyir.com

خواندن 1117 دفعه

نظر دادن

از پر شدن تمامی موارد الزامی ستاره‌دار (*) اطمینان حاصل کنید. کد HTML مجاز نیست.

نماد اعتماد

اطلاعات تماس

 آدرس: آذربایجان شرقی، مراغه، خیایان امام، روبروی داروخانه جاوید، ساختمان کپی ایران
شماره تماس: 04137252392   |    04137254200
شماره تماس: 04137253033   |   04137253034
شماره همراه: 09148659399
شماره فکس: 04136586892
پست الکترونیکی: این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید.این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید|این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت داریدساعات کاری: از 8 الی 22 شب