پا ناسو نیک Panasonic DP130
E1-01 Optics scanning failure
The home position sensor is NOT turned ON/OFF within the defined pulses after starting scanning copyir.com
E1-20 HSYNC (LSYNC) malfunction
LSYNC is not generated or within the defined time after the laser is turned ON copyir.com
E1-22 Polygon motor malfunction
Fail to detect the sync signal of the polygon motor rotation copyir.com
E1-23 Registration adjustment failure
Fail to adjust the scanner registration copyir.com
E1-30 CCD gain adjustment failure
Fail to adjust the CCD gain copyir.com
E1-31 Exposure lamp ON failure
The exposure lamp is NOT turned ON copyir.com
E1-32 Exposure lamp OFF failure
The exposure lamp is NOT turned OFF copyir.com
E1-33 CCD offset adjustment failure
Fail to adjust the CCD offset copyir.com
E3-10 High voltage power supply leak
Detect the HVPS leak for charging copyir.com
E3-20 Main motor rotation abnormality
Detect the synchronous error despite the assignment to rotate the main motor copyir.com Or detect the motor rotating normally despite the assignment to stop it copyir.com
E4-01 Thermistor malfunction
The fuser temperature sensor malfunction copyir.com
E4-01 Temperature control failure
Fail to reach the defined temperature within the defined time after the fuser lamp is turned ON copyir.com
E4-10 Fan malfunction
Detect the exhaust fan rotating despite the assignment to stop it copyir.com Or detect the fan stopped despite the assignment to rotate it copyir.com
E5-01 DC24V power supply abnormality
Fail to output DC24V copyir.com
E5-04 DC12V power supply abnormality
Fail to output DC12V when ready copyir.com
E5-05 Scanner 24V power supply abnormality
Detect an error with the scanner 24V power supply control copyir.com
E5-18 Shading adjustment error
An error occurs when adjusting the shading (black or white) copyir.com
E5-30 Energy-saver microcomputer failure
Communication error of the energy-saver microcomputer copyir.com
E5-35 FROM card write error
Write error for the flash ROM copyir.com
E5-41 Registration control PCB malfunction
The optics scanning or registration is • working despite the assignment to stop it copyir.com • not working within the defined time despite the assignment to work copyir.com
E5-42 Total counter error
Counter cable is disconnected
E5-50 FIFO operation error
Detect the operation failure of FIFO copyir.com
E5-55 PM2 error
PM2 stops abnormally copyir.com
E5-58 D/A transfer failure
DAC transfer completion interruption timeout error for CCD setting copyir.com
E5-59 Scanner LSYNC abnormality
SLSYNC interruption timeout error when detecting a peak
E5-72 GA#1 α 1 access failure
GA#1 α 1 verify error (Image processing format error)
E5-73 GA#1 α 2 access failure
GA#1 α 2 verify error (Other errors)
E5-74 GA#1 α SRAM access failure
GA#1 α built-in SRAM error
E5-75 GA#1 α CLK access failure
GA#1 α built-in white shading RAM error
E5-76 GA#2 access failure
GA#2 verify error
E5-77 GA#3 R/W error
GA#3 Read/Write hard error
E5-89 GA#1 R/W error
GA#1 Read/Write hard error
E5-99 Fatal error
Fatal error occurs with unknown case copyir.com
J01 Paper tray slip jam
J17 The paper pass sensor remains ON after the defined time elapsed copyir.com
J30 When feeding paper from the sheet bypass: The registration roller paper pass sensor is NOT turned OFF within the defined time after the registration roller is turned ON copyir.com
J31 When feeding paper from the paper tray: The registration roller paper pass sensor is NOT turned OFF within the defined time after the registration roller is turned ON copyir.com
J33 The registration roller paper pass sensor still remains ON copyir.com (Jam remains)
J40 The paper exit sensor is NOT turned ON within the defined time after the registration roller is turned ON copyir.com
J41 The paper exit sensor is NOT turned OFF within the defined time copyir.com
J42 The paper exit sensor still remains ON copyir.com (Jam remains)
J99 Others
U1 Right cover (opened)
یک پاسخ
عالی