کانون Canon NP6085

کانون Canon NP6085

ایرادات دستگاهای کانون براساس کد می باشد شرکت کپی ایران در نظر داردتمامی سرویس منالها و رفع ایرادادت را در اختیار شما عزیزان قرار دهد

E000    After power-on, the upper fixing roller does not reach 100 C within 5 min   copyir.com
E001    The temperature of the upper fixing roller exceeds 230 C for 5 sec or more   copyir.com
E002    After the temperature of the upper fixing roller has exceeded 100 C, it does not reach 180 C within 5 min   copyir.com
E003    After the temperature of the upper fixing roller has reached 180 C, it drops to 100 C or less for 5 sec or more   copyir.com
E005    The length used of the cleaning belt inside the fixing assembly has exceeded a specific value   copyir.com
E012    After the drum motor drive signal has been generated, clock pulses are not generated within 2 sec   copyir.com
E013    After the waste toner feeding screw has become locked, the detecting switch (SW20) is pressed a multiple number of times within a specific period of time   copyir.com
E014    When the fixing motor (M17) is rotating, an error is detected for 2 sec or more   copyir.com
E015    After the pick up motor drive signal has been generated, clock pulses have not been generated within 2 sec   copyir.com
E019    As many as 50,000 have been made after detecting a waste toner full condition   copyir.com
E020    During copying, the toner supply signal is 0′, indicating the absence of toner, for 3 min or more   copyir.com During toner supply sequence at time of installation, the toner supply signal does not go ‘1’ after 6 min or more   copyir.com
E030    After the total copy counter has turned OFF, an open circuit is detected for the total copy counter   copyir.com
E032    After the clock pulse signal reached the IPC communication format of the copier DC controller PCB, the Copy Data Controller-A1 does not detect the signal   copyir.com
E050    While the paper jogging guide motor (M11) drive signal is being generated, the paper guide home position signal (THP) is not generated for 2 sec or more   copyir.com While the paper jogging guide motor (M11) is being generated, the paper jogging guide home position signal (THP) is generated for two sec or more   copyir.com
E202    The scanner home position signal (SCHP) is not generated within 10 sec after the power switch or the Copy Start Key is pressed   copyir.com
E203    While the scanner motor drive signal is being generated, clock pulses are not generated within 2 sec   copyir.com
E204    The scanner leading edge signal (SCDP1) is not generated within 0   copyir.com8 sec after the scanner has started to move
E209    The scanner C   copyir.comF   copyir.comF   copyir.com position signal (SCFFP) is not generated within 10 sec after the C   copyir.comF   copyir.comF   copyir.com has been sent   copyir.com
E210    The lens X home position signal (SCFFP) is not generated within 10 sec after the C   copyir.comF   copyir.comF   copyir.com has been sent   copyir.com
E212    The lens Y home position signal (LYHP) is not generated within 9 sec after the power switch or the Copy Start Key is turned ON   copyir.com The lens Y home position signal (LYHP) is generated for 2 sec or more   copyir.com
E213    In stream reading mode, the scanner original leading edge sensor 2 signal (SCDP2) is not generated for 5 pages continuously   copyir.com
E214    While the scanner cooling fan (FM1, FM10, FM11) is rotating, an error signal is generated for 2 sec or more   copyir.com
E270    In stream reading mode, the scanner leading edge signal(SCDP2) is not generated within a specific period of time after a command has been issued to lock the scanner   copyir.com
E710    At power-on the IPC (Q170) on the DC controller PCB cannot be initialized   copyir.com
E711    After power-on the IPC (Q170) on the DC controller PCB goes out of order   copyir.com
E712    The communication IC on the RDF controller PCB has gone out of order   copyir.com
E713    The communication IC on the sorter control PCB has gone out of order   copyir.com
E715    The communication IC on the C   copyir.comF   copyir.comF   copyir.com controller PCB has gone out of order   copyir.com
E717    The communication IC on the Copy Data Controller-A1 PCB has gone out of order   copyir.com
E800    An open circuit is detected
E801    Current flows from the activation circuit in the absence of the scanning lamp ON signal   copyir.com
E802    The relay (RL3) in the power supply unit does not operate in spite of the auto power-off signal   copyir.com