کیو سرا میتا fs3750

E0    E0 – Communication error    Communication between the engine controller and the main controller is failed     copyir.com
E1    E1 – Main motor error    The main motor is overtorqued     copyir.com
E2    E2 – Laser scanner motor error    The polygon motor does not deliver a synchronous output (L) within the predetermined period of time     copyir.com
E3    E3 – Laser beam detection error    Beam detection is failed     copyir.com The photo detector board does not deliver a synchronous output (L)     copyir.com
E4    E4 – Fuser heater error    The fuser heater is not intact due to disconnection or the circuit failure     copyir.com
E5    E5 – Eraser error    The eraser is blown out or the power supply does not reach to the eraser     copyir.com
E6    E6 – Flash ROM errorr    Checksum is erroneous with the flash ROM     copyir.com
E9    E9 – Toner motor errorwi    The toner motor is overtorqued     copyir.com
F0    F0 – Front control panel error     copyir.com    Communication is failed between the front panel and the main controller     copyir.com
F1    F1 – System ROM error    Checksum is failed with EPROMs on the main controller board     copyir.com
F2    F2 – Main memory error    Checksum is failed with the RAM on the main controller board     copyir.com
F3    F3 – General failure    Miscellaneous failure with the main controller, other than F0, F1, and F3, above     copyir.com

اشتراک گذاری در:

پست های مرتبط

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

جستجو در مطالب

سوالی دارید؟

برای آگاهی از راه های ارتباط با ما، بر روی دکمه زیر کلیک کنید

مطالب جدید ...

در خبرنامه ما عضو شوید