کیو سرا میتا taskalfa 181

کیو سرا میتا taskalfa 181

C0030    Fax control PWB system problem
Processing with the fax software was disabled due to a hardware or software problem        copyir.com    Defective fax control PWB        copyir.com
C0070    Abnormal detection of fax control PWB incompatibility
Fax software is not compatible with main software    Fax software or main software is something of the other machine        copyir.com
C0100    Backup memory (EEPROM) device problem (Main PWB)
Reading from or writing to EEPROM cannot be performed        copyir.com    Defective main PWB        copyir.com
C0110    Backup memory data problem (Main PWB)
Data in the specified area of the backup memory does not match the specified values    Data damage of EEPROM        copyir.com
C0130    Backup memory device problem (Main EEPROM)
Reading from or writing to EEPROM cannot be performed        copyir.com    Defective main PWB        copyir.com
Device damage of EEPROM        copyir.com
C0140    Backup memory data problem (Main EEPROM)
Reading data from EEPROM is abnormal        copyir.com    Data damage of EEPROM        copyir.com
C0150    Backup memory device problem (Engine EEPROM)
Reading from or writing to EEPROM cannot be performed        copyir.com    Defective engine PWB        copyir.com
Device damage of EEPROM        copyir.com
C0160    Backup memory data problem (Engine EEPROM)
Reading data from EEPROM is abnormal        copyir.com    Data damage of EEPROM        copyir.com
C0170    Copy counts problem
When the power is turned on, the total count and the scan count are abnormal both on the main PWB and the engine PWB        copyir.com    Data damage of EEPROM        copyir.com
Defective PWB
C0180    Machine number mismatch
Machine number of main PWB and engine PWB does not match        copyir.com    Data damage of EEPROM        copyir.com
C0210    Communication problem between the main and engine
When the power is turned on, the machine does not detect the low level of SBSY and the high level of SDIR for 10 s        copyir.com    Poor contact in the connector terminals        copyir.com
Defective PWB        copyir.com
C0240    Printer PWB communication problem
The printer PWB does not respond 120 s after the power is turned on        copyir.com    Poor contact in the connector terminals        copyir.com
Defective main PWB        copyir.com
C0250    Scanner network board communication problem
The scanner network board does not respond        copyir.com    Poor contact in the connector terminals        copyir.com
Defective PWB
C0280    Communication problem between the fax control PWB and main PWB
Communication between the fax control PWB and the main PWB of the machine cannot be performed normally        copyir.com    Poor contact in the connector terminals        copyir.com
Defective PWB        copyir.com
C0410    Document processor communication problem
Communication fails five times succes-sively        copyir.com    Document processor installed incorrectly        copyir.com
Defective PWB        copyir.com
C0420    First paper feeder communication problem Communication fails five times succes-sively        copyir.com    First paper feeder installed incorrectly        copyir.com
Defective PWB        copyir.com
C0440    Built-in finisher communication problem
Communication fails five times successively        copyir.com    Poor contact in the connector terminals        copyir.com
Defective PWB        copyir.com
C0500    Second paper feeder communication problem
Communication fails five times succes-sively        copyir.com    Second paper feeder installed incorrectly        copyir.com
Defective PWB        copyir.com
C0510    Third paper feeder communication problem
Communication fails five times successively        copyir.com    Third paper feeder installed incorrectly        copyir.com
Defective PWB        copyir.com
C0610    Bitmap (DIMM) problem
There is a problem with the data or address bus of the bitmap DRAM        copyir.com    Defective main PWB        copyir.com
DIMM installed incorrectly        copyir.com
Defective DIMM        copyir.com
C0630    DMA problem
DMA transmission of compressed, decompressed, rotated, relocated or blanked-out image data does not complete within the specified period of time        copyir.com    Defective main PWB        copyir.com
C0800    Image processing problem
JAM05 is detected twice        copyir.com    Defective main PWB        copyir.com
C0820    Fax control PWB CG ROM checksum error
A checksum error occurred with the CG ROM data of the fax control PWB        copyir.com    Defective fax control PWB        copyir.com
C0830    Fax control PWB flash program area checksum error
A checksum error occurred with the program of the fax control PWB        copyir.com    Defective fax control PWB        copyir.com
C0860    Fax control PWB software switch checksum error
A checksum error occurred with the software switch value of the fax control PWB        copyir.com    Defective fax software        copyir.com
Defective fax control PWB        copyir.com
C0870    Fax control PWB to main PWB high capacity data transfer problem
High-capacity data transfer between the fax control PWB and the main PWB of the machine was not normally performed even if the data transfer was retried the specified times        copyir.com    Poor contact in the connector terminals        copyir.com
Defective PWB        copyir.com
C0880    Fax control PWB program archive problem (optional fax)
When power is turned on, the compressed program in the Flash ROM on the fax control PWB was not successfully decompressed        copyir.com    Defective fax control PWB        copyir.com
C0890    Fax control PWB CG FONT archive problem (optional fax)
When power is turned on, the compressed CG font in the Flash ROM on the fax control PWB was not successfully decompressed        copyir.com    Defective fax control PWB        copyir.com
C0900    Fax software incompatibility detection problem
Version of fax software is not compatible with that of main software        copyir.com    Fax software version or main software is earlier        copyir.com
C0920    Fax file system error
The backup data is not retained for file system abnormality of flash memory of the fax control PWB        copyir.com    Defective fax control PWB        copyir.com
C2000    Drive motor problem
A stable state does not continue for 1 s from 1 s after the drive motor is activated        copyir.com    Poor contact in the connector terminals        copyir.com
Defective drive transmission system        copyir.com
Defective engine PWB        copyir.com
Defective drive motor        copyir.com
C2200    Drum motor problem
A stable state does not continue for 1 s from 1 s after the drum motor is activated        copyir.com    Poor contact in the connector terminals        copyir.com
Defective drive transmission system        copyir.com
Defective engine PWB        copyir.com
Defective drum motor        copyir.com
C3100    Scanner carriage problem
The home position is not correct when the power is turned on or at the start of copying using the table        copyir.com    Poor contact in the connector terminals        copyir.com
Defective home position switch        copyir.com
Defective scanner motor        copyir.com
The mirror frame, exposure lamp, or scanner wire is defective        copyir.com
Defective engine PWB        copyir.com
C3200    Exposure lamp problem
Non-lighting of the exposure lamp is detected at the beginning of copying        copyir.com    Poor contact in the connector terminals        copyir.com
Defective exposure lamp        copyir.com
Incorrect shading position        copyir.com
Defective PWB        copyir.com
C3300    AGC problem
After AGC, correct input is not obtained at CCD        copyir.com    Poor contact in the connector terminals        copyir.com
Defective exposure lamp
Defective PWB        copyir.com
C4000    Polygon motor synchronization problem
The polygon motor does not reach the stable speed within 20 s of the START signal turning on        copyir.com    Poor contact in the connector terminals        copyir.com
Defective polygon motor        copyir.com
Defective engine PWB        copyir.com
C4010    Polygon motor steady-state problem
Stable OFF is detected for 5 s continuously after polygon motor stability        copyir.com    Poor contact in the connector terminals        copyir.com
Defective polygon motor        copyir.com
Defective engine PWB        copyir.com
C4200    BD steady-state problem
ASIC detects a BD error for 600 ms after the polygon motor rotation has been stabilized        copyir.com    Poor contact in the connector terminals        copyir.com
Defective laser scanner unit        copyir.com
Defective engine PWB        copyir.com
C6000    Fuser heater break
The temperature does not reach 70 °C/ 158°F in 15 s before secondary stabilization        copyir.com
Temperature rise of 1°C/1        copyir.com8°F does not occur in 5 s before secondary stabilization (except during printing)        copyir.com    Poor contact in the fuser thermistor connector terminals        copyir.com
Fuser thermistor installed incorrectly        copyir.com
Fuser thermostat triggered        copyir.com
Fuser heater installed incorrectly        copyir.com
Broken fuser heater wire        copyir.com
C6020    Abnormally high fuser thermistor temperature
Fuser thermistor is detected 230°C/ 446°F or more for 40 ms    Shorted thermistor        copyir.com
Broken heater control circuit on the power source PWB        copyir.com
C6050    Abnormally low fuser thermistor temperature
Fuser thermistor remains below 90°C/ 194°F for 1 s        copyir.com    Poor contact in the fuser thermistor connector terminals        copyir.com
Broken fuser thermistor wire        copyir.com
Fuser thermistor installed incorrectly        copyir.com
Fuser thermostat triggered        copyir.com
Fuser heater installed incorrectly        copyir.com
Broken fuser heater wire        copyir.com
C6400    Zero-cross signal error
Interrupt of the zero-cross signal does not occur more than 1 s        copyir.com    Poor contact in the connector terminals        copyir.com
Defective power source PWB        copyir.com
Defective engine PWB
C7800    Broken external thermistor wire
The thermistor output value is 0        copyir.com5 V or less        copyir.com    Poor contact in the connector terminals        copyir.com
Defective humidity sensor        copyir.com
C7810    Short-circuited external thermistor wire
The thermistor output value is 4        copyir.com5 V or more        copyir.com    Poor contact in the connector terminals        copyir.com
Defective humidity sensor
C8170    Built-in finisher front side registration motor problem
When the front-side registration home-position sensor is turned on during initialization, the sensor did not turn on while it has moved by 106 pulses        copyir.com When the front-side registration home-position sensor is turned off during initialization, the sensor did not turn on in 3 s        copyir.com    The front side registration motor connector makes poor contact        copyir.com
Defective front side registration motor        copyir.com
The front side registration home position sensor connector makes poor contact        copyir.com
Defective front side registration home position sensor        copyir.com
Defective finisher control PWB        copyir.com
C8180    Built-in finisher rear side registration motor problem
When the rear-side registration home-position sensor is turned on during initialization, the sensor did not turn on while it has moved by 106 pulses        copyir.com
When the rear-side registration home-position sensor is turned off during initialization, the sensor did not turn on in 3 s        copyir.com    The rear side registration motor connector makes poor contact        copyir.com
Defective rear side registration motor        copyir.com
The rear side registration home position sensor connector makes poor contact        copyir.com
Defective rear side registration home position sensor        copyir.com
Defective finisher control PWB        copyir.com
C8190    Built-in finisher trailing edge registration motor problem
When the trailing edge registration home-position sensor is turned on during initialization, the sensor did not turn on while it has moved by 106 pulses        copyir.com
When the trailing edge registration home-position sensor is turned off during initialization, the sensor did not turn on in 3 s        copyir.com    The trailing edge registration motor connector makes poor contact        copyir.com
Defective trailing edge registration motor        copyir.com
The trailing edge registration home position sensor connector makes poor contact        copyir.com
Defective trailing edge registration home position sensor        copyir.com
Defective finisher control PWB        copyir.com
C8210    Built-in finisher stapler problem
The stapler home position sensor does not change state from nondetection to detection within 200 ms of the start of stapler motor counterclockwise (forward) rotation        copyir.com During initialization, the stapler home position sensor does not change state from non-detection to detection within 600 ms of the start of stapler motor clockwise (reverse) rotation        copyir.com    The stapler connector makes poor contact        copyir.com
The stapler is blocked with a staple        copyir.com
The stapler is broken        copyir.com
Defective finisher control PWB        copyir.com
C8180    Built-in finisher rear side registration motor problem
When the rear-side registration home-position sensor is turned on during initialization, the sensor did not turn on while it has moved by 106 pulses        copyir.com
When the rear-side registration home-position sensor is turned off during initialization, the sensor did not turn on in 3 s        copyir.com    The rear side registration motor connector makes poor contact        copyir.com
Defective rear side registration motor        copyir.com
The rear side registration home position sensor connector makes poor contact        copyir.com
Defective rear side registration home position sensor        copyir.com
Defective finisher control PWB        copyir.com
C8190    Built-in finisher trailing edge registration motor problem
When the trailing edge registration home-position sensor is turned on during initialization, the sensor did not turn on while it has moved by 106 pulses        copyir.com
When the trailing edge registration home-position sensor is turned off during initialization, the sensor did not turn on in 3 s        copyir.com    The trailing edge registration motor connector makes poor contact        copyir.com
Defective trailing edge registration motor        copyir.com
The trailing edge registration home position sensor connector makes poor contact        copyir.com
Defective trailing edge registration home position sensor        copyir.com
Defective finisher control PWB        copyir.com
C8210    Built-in finisher stapler problem
The stapler home position sensor does not change state from nondetection to detection within 200 ms of the start of stapler motor counterclockwise (forward) rotation        copyir.com During initialization, the stapler home position sensor does not change state from non-detection to detection within 600 ms of the start of stapler motor clockwise (reverse) rotation        copyir.com    The stapler connector makes poor contact        copyir.com
The stapler is blocked with a staple        copyir.com
The stapler is broken        copyir.com
Defective finisher control PWB        copyir.com