کانون Canon iPF9400
0134xxxx-xxxx GARO warning
0180xxxx-xxxx Printhead warning
0181xxxx-xxxx Ink warning
0184xxxx-xxxx Maintenance cartridge warning
0301xxxx-xxxx Media error
0303xxxx-xxxx Cover error
0306xxxx-xxxx Media error
0313xxxx-xxxx Sensors, fans, motors error
0380xxxx-xxxx Printhead error
0381xxxx-xxxx Ink error
0383xxxx-xxxx Ink error
0384xxxx-xxxx Maintenance cartridge error
0386xxxx-xxxx Media error
0387xxxx-xxxx Cutter unit error
0389xxxx-xxxx Media take-up unit error
0390xxxx-xxxx Firmware error
E141-4046 Number of recovery rotations reaching 50,000 or more Replace the purge kit, and then clear the parts counter in the service mode copyir.com
E144-4047 Feed system counting error Replace the tube unit, and then clear the parts counter in the service mode copyir.com
E144-4048 Initial filling error Replace the ink supply unit copyir.com
E146-4001 Borderless/idle ejection/ mist recovery count full Replace the platen duct or mist fan or suction fan or waste ink absorber, and then clear the parts counter in the service mode copyir.com
E161-403E Abnormally high printhead R temperature Replace the printhead R copyir.com
E161-403F Abnormally high printhead L temperature Replace the printhead L copyir.com
E194-404A No ink ejection counting error
E196-4034 Multi sensor unit version error Replace the multi sensor unit copyir.com
E196-4040 Checksum error Replace the main controller PCB copyir.com
E196-4041 Flash memory clearing error Replace the main controller PCB copyir.com
E196-4042 Flash memory write error Replace the main controller PCB copyir.com
E196-4042 MIT Data transfer error
E196-4045 Engine EEPROM write error Replace the main controller PCB copyir.com
E196-4049 Transfer ROM data type error
E196-404C Serial number mismatch between boards Execute PCB replacement mode or replace the main controller PCB copyir.com
E196-404D Machine ID mismatch between boards Replace the main controller PCB copyir.com
E196-404E EEPROM read error Replace the main controller PCB copyir.com
E198-401C RTC error Replace the lithium battery or replace the main controller PCB copyir.com
E198-401D RTC low battery error Replace the lithium battery or replace the main controller PCB copyir.com
E198-401E RTC clock stopped Replace the lithium battery or replace the main controller PCB copyir.com
E199-404B Humidity sensor unpluged Check the temperature/humidity sensor board connector or replace the board copyir.com
E602-401A HDD failure Replace the HDD unit copyir.com
E602-401B HDD connection error Check the HDD connector/Replace the HDD unit copyir.com
0134xxxx-xxxx GARO warning
0180xxxx-xxxx Printhead warning
0181xxxx-xxxx Ink warning
0184xxxx-xxxx Maintenance cartridge warning
0301xxxx-xxxx Media error
0303xxxx-xxxx Cover error
0306xxxx-xxxx Media error
0313xxxx-xxxx Sensors, fans, motors error
0380xxxx-xxxx Printhead error
0381xxxx-xxxx Ink error
0383xxxx-xxxx Ink error
0384xxxx-xxxx Maintenance cartridge error
0386xxxx-xxxx Media error
0387xxxx-xxxx Cutter unit error
0389xxxx-xxxx Media take-up unit error
0390xxxx-xxxx Firmware error
0134xxxx-xxxx GARO warning
0180xxxx-xxxx Printhead warning
0181xxxx-xxxx Ink warning
0184xxxx-xxxx Maintenance cartridge warning
0301xxxx-xxxx Media error
0303xxxx-xxxx Cover error
0306xxxx-xxxx Media error
0313xxxx-xxxx Sensors, fans, motors error
0380xxxx-xxxx Printhead error
0381xxxx-xxxx Ink error
0383xxxx-xxxx Ink error
0384xxxx-xxxx Maintenance cartridge error
0386xxxx-xxxx Media error
0387xxxx-xxxx Cutter unit error
0389xxxx-xxxx Media take-up unit error
0390xxxx-xxxx Firmware error
E141-4046 Number of recovery rotations reaching 50,000 or more Replace the purge kit, and then clear the parts counter in the service mode copyir copyir.comcom
E144-4047 Feed system counting error Replace the tube unit, and then clear the parts counter in the service mode copyir copyir.comcom
E144-4048 Initial filling error Replace the ink supply unit copyir copyir.comcom
E146-4001 Borderless/idle ejection/ mist recovery count full Replace the platen duct or mist fan or suction fan or waste ink absorber, and then clear the parts counter in the service mode copyir copyir.comcom
E161-403E Abnormally high printhead R temperature Replace the printhead R copyir copyir.comcom
E161-403F Abnormally high printhead L temperature Replace the printhead L copyir copyir.comcom
E194-404A No ink ejection counting error
E196-4034 Multi sensor unit version error Replace the multi sensor unit copyir copyir.comcom
E196-4040 Checksum error Replace the main controller PCB copyir copyir.comcom
E196-4041 Flash memory clearing error Replace the main controller PCB copyir copyir.comcom
E196-4042 Flash memory write error Replace the main controller PCB copyir copyir.comcom
E196-4042 MIT Data transfer error
E196-4045 Engine EEPROM write error Replace the main controller PCB copyir copyir.comcom
E196-4049 Transfer ROM data type error
E196-404C Serial number mismatch between boards Execute PCB replacement mode or replace the main controller PCB copyir copyir.comcom
E196-404D Machine ID mismatch between boards Replace the main controller PCB copyir copyir.comcom
E196-404E EEPROM read error Replace the main controller PCB copyir copyir.comcom
E198-401C RTC error Replace the lithium battery or replace the main controller PCB copyir copyir.comcom
E198-401D RTC low battery error Replace the lithium battery or replace the main controller PCB copyir copyir.comcom
E198-401E RTC clock stopped Replace the lithium battery or replace the main controller PCB copyir copyir.comcom
E199-404B Humidity sensor unpluged Check the temperature/humidity sensor board connector or replace the board copyir copyir.comcom
E602-401A HDD failure Replace the HDD unit copyir copyir.comcom
E602-401B HDD connection error Check the HDD connector/Replace the HDD unit copyir copyir.comcom
0134xxxx-xxxx GARO warning
0180xxxx-xxxx Printhead warning
0181xxxx-xxxx Ink warning
0184xxxx-xxxx Maintenance cartridge warning
0301xxxx-xxxx Media error
0303xxxx-xxxx Cover error
0306xxxx-xxxx Media error
0313xxxx-xxxx Sensors, fans, motors error
0380xxxx-xxxx Printhead error
0381xxxx-xxxx Ink error
0383xxxx-xxxx Ink error
0384xxxx-xxxx Maintenance cartridge error
0386xxxx-xxxx Media error
0387xxxx-xxxx Cutter unit error
0389xxxx-xxxx Media take-up unit error
0390xxxx-xxxx Firmware error
E141-4046 Number of recovery rotations reaching 50,000 or more Replace the purge kit, and then clear the parts counter in the service mode copyir.com
E144-4047 Feed system counting error Replace the tube unit, and then clear the parts counter in the service mode copyir.com
E144-4048 Initial filling error Replace the ink supply unit copyir.com
E146-4001 Borderless/idle ejection/ mist recovery count full Replace the platen duct or mist fan or suction fan or waste ink absorber, and then clear the parts counter in the service mode copyir.com
E161-403E Abnormally high printhead R temperature Replace the printhead R copyir.com
E161-403F Abnormally high printhead L temperature Replace the printhead L copyir.com
E194-404A No ink ejection counting error
E196-4034 Multi sensor unit version error Replace the multi sensor unit copyir.com
E196-4040 Checksum error Replace the main controller PCB copyir.com
E196-4041 Flash memory clearing error Replace the main controller PCB copyir.com
E196-4042 Flash memory write error Replace the main controller PCB copyir.com
E196-4042 MIT Data transfer error
E196-4045 Engine EEPROM write error Replace the main controller PCB copyir.com
E196-4049 Transfer ROM data type error
E196-404C Serial number mismatch between boards Execute PCB replacement mode or replace the main controller PCB copyir.com
E196-404D Machine ID mismatch between boards Replace the main controller PCB copyir.com
E196-404E EEPROM read error Replace the main controller PCB copyir.com
E198-401C RTC error Replace the lithium battery or replace the main controller PCB copyir.com
E198-401D RTC low battery error Replace the lithium battery or replace the main controller PCB copyir.com
E198-401E RTC clock stopped Replace the lithium battery or replace the main controller PCB copyir.com
E199-404B Humidity sensor unpluged Check the temperature/humidity sensor board connector or replace the board copyir.com
E602-401A HDD failure Replace the HDD unit copyir.com
E602-401B HDD connection error Check the HDD connector/Replace the HDD unit copyir.com
