کپی ایران

کو نیکا مینو لتا magicolor1690mf

  1. کو نیکا مینو لتا magicolor1690mf

  2.  Transport motor malfunction
    • The motor lock signal remains HIGH for a predetermined consecutive period of time while the transport motor remains energized     copyir     copyir.comcom    1 Check the M1 connector for proper connection and correct as necessary     copyir     copyir.comcom 2 Check M1 for proper drive coupling and correct as necessary     copyir     copyir.comcom 3 Check the PRCB connector for proper connection and correct as necessary     copyir     copyir.comcom 4 M1 operation check PRCB PJ8-1 to 6 C-2     copyir     copyir.comcom 5 Change M1     copyir     copyir.comcom 6 Change PRCB     copyir     copyir.comcom 7 Change DCPU     copyir     copyir.comcom
    001B    Developing motor malfunction
    • The developing motor does not rotate evenly even after the lapse of a given period of time while it is being started     copyir     copyir.comcom • The motor lock signal remains HIGH for a given period of consecutive time while the developing motor is being rotated     copyir     copyir.comcom    1 Check the developing motor connector for proper connection and correct as necessary     copyir     copyir.comcom 2 Check the PRCB connector for proper connection and correct as necessary     copyir     copyir.comcom 3 M3 operation check PRCB PJ5-1 to 4 C-12     copyir     copyir.comcom 4 Change M3     copyir     copyir.comcom 5 Change PRCB     copyir     copyir.comcom 6 Change DCPU     copyir     copyir.comcom
    0045    Exit tray cooling fan motor malfunction    1 Check the FM4 connector for proper connection and correct as necessary     copyir     copyir.comcom 2 Check the fan for possible overload and correct as necessary     copyir     copyir.comcom 3 FM4 operation check PRCB PJ24-4 (REM) PRCB PJ24-6 (LOCK) C-13     copyir     copyir.comcom 4 Change FM4     copyir     copyir.comcom 5 Change MFPB     copyir     copyir.comcom
    004A    Duplex cooling fan motor malfunction
    004C    Ozone ventilation fan motor malfunction
    • The ozone ventilation fan motor does not rotate evenly even after the lapse of a given period of time while it is being started     copyir     copyir.comcom • The motor lock signal remains HIGH for a given period of consecutive time while the ozone ventilation fan motor is being rotated     copyir     copyir.comcom    1 Check the FM2 connector for proper connection and correct as necessary     copyir     copyir.comcom 2 Check the fan for possible overload and correct as necessary     copyir     copyir.comcom 3 FM2 operation check PRCB PJ16-1 (REM) PRCB PJ16-3 (LOCK) C-4     copyir     copyir.comcom 4 Change FM2     copyir     copyir.comcom 5 Change PRCB     copyir     copyir.comcom
    004E    DC power supply fan motor malfunction
    • The DC power supply fan motor does not rotate evenly even after the lapse of a given period of time while it is being started     copyir     copyir.comcom • The motor lock signal remains HIGH for a given period of consecutive time while the DC power supply fan motor is being rotated     copyir     copyir.comcom    1 Check the FM1 connector for proper connection and correct as necessary     copyir     copyir.comcom 2 Check the fan for possible overload and correct as necessary     copyir     copyir.comcom 3 FM1 operation check HV CN2-1 (REM) HV CN2-3 (LOCK) B-4 to 5     copyir     copyir.comcom 4 Change FM1     copyir     copyir.comcom 5 Change PRCB     copyir     copyir.comcom
    0092    Transfer belt rotation failure
    • The belt positioning sensor does not detect the transfer belt position detection hole a second time even after the lapse of a predetermined period of time after it has detected one while the transfer belt is rotated     copyir     copyir.comcom    1 Check the PRCB connector for proper connection and correct as necessary     copyir     copyir.comcom 2 PS6 sensor check     copyir     copyir.comcom 3 Change imaging cartridge     copyir     copyir.comcom 4 Change PRCB     copyir     copyir.comcom
    0094    2nd image transfer pressure / retraction failure
    • The 2nd image transfer retraction position sensor is not activated (retracted position) within a given period of time after the retraction sequence of the 2nd transfer roller has been started     copyir     copyir.comcom • The 2nd image transfer retraction position sensor is not deactivated (pressed position) within a given period of time after the pressure sequence of the 2nd transfer roller has been started     copyir     copyir.comcom    1 Check the M1 connector for proper connection and correct as necessary     copyir     copyir.comcom 2 Check the SD4 connector for proper connection and correct as necessary     copyir     copyir.comcom 3 Check M1 for proper drive coupling and correct as necessary     copyir     copyir.comcom 4 Check SD4 for proper drive coupling and correct as necessary     copyir     copyir.comcom 5 Check the PRCB connector for proper connection and correct as necessary     copyir     copyir.comcom 6 PS3 sensor check PRCB PJ12-3 (ON) C-2     copyir     copyir.comcom 7 SD4 operation check PRCB PJ10-6 (REM) C-9     copyir     copyir.comcom 8 M1 operation check PRCB PJ8-1 to 6 C-2     copyir     copyir.comcom 9 Change M1     copyir     copyir.comcom 10 Change SD4     copyir     copyir.comcom 11 Change PRCB     copyir     copyir.comcom
    0300    Polygon motor malfunction
    • The polygon motor does not rotate evenly even after the lapse of a given period of time after it has been started     copyir     copyir.comcom • The motor lock signal remains HIGH for a given period of consecutive time while the polygon motor is being rotated     copyir     copyir.comcom    1 Check the cable and connector for proper connection and correct as necessary     copyir     copyir.comcom 2 Change PH unit     copyir     copyir.comcom 3 Change PRCB     copyir     copyir.comcom
    0310    Laser malfunction
    • The SOS signal is not detected within a given period of time after the output of the laser has been started     copyir     copyir.comcom    1 Check the cable and connector for proper connection and correct as necessary     copyir     copyir.comcom 2 Change PH unit     copyir     copyir.comcom 3 Change PRCB     copyir     copyir.comcom
    0500    Fuser warm-up failure
    • The thermistor /1 does not detect the specified temperature and the warm-up cycle is not completed even after the lapse of a given period of time after the cycle has been started     copyir     copyir.comcom    1 Change fuser unit     copyir     copyir.comcom 2 1     copyir     copyir.comcom Main switch is turned ON     copyir     copyir.comcom 2     copyir     copyir.comcom Open the top cover     copyir     copyir.comcom 3     copyir     copyir.comcom Press the following ten keys in this order 2-6-2-3-7     copyir     copyir.comcom 4     copyir     copyir.comcom Main switch is turned OFF/ON     copyir     copyir.comcom 3 Change PRCB     copyir     copyir.comcom 4 Change DCPU     copyir     copyir.comcom
    0502    Thermistor open-circuit failure
    • The temperature detected by the thermistor does not reach a predetermined level even after the lapse of a given period time after the warm-up cycle has been started     copyir     copyir.comcom    1 Check the fuser unit for correct installation (whether it is secured in position)     copyir     copyir.comcom 2 Check the fuser unit, DCPU, and PRCB for proper connection and correct as necessary     copyir     copyir.comcom 3 Change fuser unit     copyir     copyir.comcom 4 Change PRCB     copyir     copyir.comcom 5 Change DCPU     copyir     copyir.comcom
    0503    Thermistor resistance failure
    • The difference between the temperature detected by thermistor/1 and that detected by thermistor/2 exceeds a predetermined value     copyir     copyir.comcom    1 Change fuser unit     copyir     copyir.comcom 2 1     copyir     copyir.comcom Main switch is turned ON     copyir     copyir.comcom 2     copyir     copyir.comcom Open the top cover     copyir     copyir.comcom 3     copyir     copyir.comcom Press the following ten keys in this order 2-6-2-3-7     copyir     copyir.comcom 4     copyir     copyir.comcom Main switch is turned OFF/ON     copyir     copyir.comcom 3 Change PRCB     copyir     copyir.comcom 4 Change DCPU     copyir     copyir.comcom
    0510    Abnormally low fuser temperature
    • The temperature detected by the thermistor /1 remains lower than the specified value for a given period of time or longer     copyir     copyir.comcom    1 Check the fuser unit for correct installation (whether it is secured in position)     copyir     copyir.comcom 2 Check the fuser unit, DCPU, and PRCB for proper connection and correct as necessary     copyir     copyir.comcom 3 Change fuser unit     copyir     copyir.comcom 4 Change PRCB     copyir     copyir.comcom 5 Change DCPU     copyir     copyir.comcom
    0520    Abnormally high fuser temperature
    • The temperature detected by the thermistor /1 remains higher than the specified value for a given period of time or longer     copyir     copyir.comcom • The heater lamp remains ON for a given period of time or longer     copyir     copyir.comcom    1 Check the fuser unit for correct installation (whether it is secured in position)     copyir     copyir.comcom 2 Check the fuser unit, DCPU, and PRCB for proper connection and correct as necessary     copyir     copyir.comcom 3 Change fuser unit     copyir     copyir.comcom 4 Change PRCB     copyir     copyir.comcom 5 Change DCPU     copyir     copyir.comcom
    0650    Scanner home sensor abnormalities    1 Check to see if the lock lever of the Scanner unit is unlocked and unlock the lock lever if it is locked     copyir     copyir.comcom 2 Check the M101 connector for proper connection and correct as necessary     copyir     copyir.comcom 3 Check M101 for proper drive coupling and correct as necessary     copyir     copyir.comcom 4 Check the PRCB connector for proper connection and correct as necessary     copyir     copyir.comcom 5 M101 operation check     copyir     copyir.comcom MFPB P2-1 to 4 1680MF: J-12 1690MF: J-6     copyir     copyir.comcom 6 Change PRCB     copyir     copyir.comcom 7 Change DCPU     copyir     copyir.comcom
    0F51    Waste toner full sensor malfunction
    • It is determined that the LED and photo receiver are faulty through a check made when a new imaging cartridge is detected     copyir     copyir.comcom    1 Check the PRCB connector for proper connection and correct as necessary     copyir     copyir.comcom 2 PS7 sensor check     copyir     copyir.comcom 3 Change imaging cartridge     copyir     copyir.comcom 4 Change PRCB     copyir     copyir.comcom
    1038    Engine connect error    1 Turn OFF and ON the power switch     copyir     copyir.comcom 2 Check the PRCB connector for proper connection and correct as necessary     copyir     copyir.comcom 3 Check the MFPB connector for proper connection and correct as necessary     copyir     copyir.comcom 4 Check for proper connection between PRCB and MFPB and correct as necessary     copyir     copyir.comcom 5 Change MFPB     copyir     copyir.comcom 6 Change PRCB     copyir     copyir.comcom
    13C0    Print control board malfunction
    • A communication error occurs in print control board (PRCB)     copyir     copyir.comcom    1 Reboot the main body     copyir     copyir.comcom 2 Change PRCB     copyir     copyir.comcom
    13DD    Backup data error
    • The printer determines that EEPROM is yet to be mounted when the main power switch is turned ON     copyir     copyir.comcom    1 Check the cable and connector for proper connection and correct as necessary     copyir     copyir.comcom 2 Change PRCB     copyir     copyir.comcom 3 Change MFPB     copyir     copyir.comcom
    13E2    Engine flash ROM write error
    • Flash ROM writing is found faulty during a check     copyir     copyir.comcom    1 Check the cable and connector for proper connection and correct as necessary     copyir     copyir.comcom 2 Change PRCB     copyir     copyir.comcom 3 Change MFPB     copyir     copyir.comcom
    13F0    Engine control failure
    • An undefined malfunction occurs in the engine section (PRCB, etc     copyir     copyir.comcom)     copyir     copyir.comcom    1 Check the cable and connector for proper connection and correct as necessary     copyir     copyir.comcom 2 Change PRCB     copyir     copyir.comcom 3 Change MFPB     copyir     copyir.comcom
    14A3    IR lamp malfunction    1 Check the exposure lamp for lighting condition when the power switch is turned ON and, if any faulty symptom is evident, correct the Scanner Unit     copyir     copyir.comcom 2 Check the MFPB connector for proper connection and correct as necessary     copyir     copyir.comcom 3 Change scanner unit     copyir     copyir.comcom 4 Change MFPB     copyir     copyir.comcom
    3C00    Trouble related to security
    3C10    Trouble related to security
    3C40    Trouble related to security
    3FFF    Flash ROM write error    1 Check the cable and connector for proper connection and correct as necessary     copyir     copyir.comcom 2 Identify the specific firmware that is responsible for the error     copyir     copyir.comcom 3 Rewrite the firmware     copyir     copyir.comcom 4 Unplug parameter chip from PRCB and then plug it back in     copyir     copyir.comcom 5 Change PRCB     copyir     copyir.comcom 6 Change MFPB     copyir     copyir.comcom
  3.  Scanner home sensor abnormalities    1 Check to see if the lock lever of the Scanner unit is unlocked and unlock the lock lever if it is locked     copyir.com 2 Check the M101 connector for proper connection and correct as necessary     copyir.com 3 Check M101 for proper drive coupling and correct as necessary     copyir.com 4 Check the PRCB connector for proper connection and correct as necessary     copyir.com 5 M101 operation check     copyir.com MFPB P2-1 to 4 1680MF: J-12 1690MF: J-6     copyir.com 6 Change PRCB     copyir.com 7 Change DCPU     copyir.com
    0F51    Waste toner full sensor malfunction
    • It is determined that the LED and photo receiver are faulty through a check made when a new imaging cartridge is detected     copyir.com    1 Check the PRCB connector for proper connection and correct as necessary     copyir.com 2 PS7 sensor check     copyir.com 3 Change imaging cartridge     copyir.com 4 Change PRCB     copyir.com
    1038    Engine connect error    1 Turn OFF and ON the power switch     copyir.com 2 Check the PRCB connector for proper connection and correct as necessary     copyir.com 3 Check the MFPB connector for proper connection and correct as necessary     copyir.com 4 Check for proper connection between PRCB and MFPB and correct as necessary     copyir.com 5 Change MFPB     copyir.com 6 Change PRCB     copyir.com
    13C0    Print control board malfunction
    • A communication error occurs in print control board (PRCB)     copyir.com    1 Reboot the main body     copyir.com 2 Change PRCB     copyir.com
    13DD    Backup data error
    • The printer determines that EEPROM is yet to be mounted when the main power switch is turned ON     copyir.com    1 Check the cable and connector for proper connection and correct as necessary     copyir.com 2 Change PRCB     copyir.com 3 Change MFPB     copyir.com
    13E2    Engine flash ROM write error
    • Flash ROM writing is found faulty during a check     copyir.com    1 Check the cable and connector for proper connection and correct as necessary     copyir.com 2 Change PRCB     copyir.com 3 Change MFPB     copyir.com
    13F0    Engine control failure
    • An undefined malfunction occurs in the engine section (PRCB, etc     copyir.com)     copyir.com    1 Check the cable and connector for proper connection and correct as necessary     copyir.com 2 Change PRCB     copyir.com 3 Change MFPB     copyir.com
    14A3    IR lamp malfunction    1 Check the exposure lamp for lighting condition when the power switch is turned ON and, if any faulty symptom is evident, correct the Scanner Unit     copyir.com 2 Check the MFPB connector for proper connection and correct as necessary     copyir.com 3 Change scanner unit     copyir.com 4 Change MFPB     copyir.com
    3C00    Trouble related to security
    3C10    Trouble related to security
    3C40    Trouble related to security
    3FFF    Flash ROM write error    1 Check the cable and connector for proper connection and correct as necessary     copyir.com 2 Identify the specific firmware that is responsible for the error     copyir.com 3 Rewrite the firmware     copyir.com 4 Unplug parameter chip from PRCB and then plug it back in     copyir.com 5 Change PRCB     copyir.com 6 Change MFPB     copyir.com

اشتراک گذاری در:

پست های مرتبط

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *

جستجو در مطالب

سوالی دارید؟

برای آگاهی از راه های ارتباط با ما، بر روی دکمه زیر کلیک کنید

Contact Us

مطالب جدید ...

در خبرنامه ما عضو شوید

کپی ایران

دستگاه فتوکپی، ریسوگراف، پلاتر و مواد مصرفی

صفحات مهم

دسترسی سریع

نماد اعتماد از وزارت صنعت و معدن

تمامی حقوق این سایت متعلق به کپی ایران بوده و هر گونه بهره‌برداری از آن مستلزم کسب اجازه می‌باشد.