کیو سرا میتا taskalfa 2420w

کیو سرا میتا taskalfa 2420w

E        copyir        copyir.comcom0000    Fuser Temperature Rising Error
Fuser Temperature does not reach 50C within 120 seconds after turning on        copyir        copyir.comcom
E        copyir        copyir.comcom0001    Fuser Over Temperature Error
Fuser Temperature reaches over 200C        copyir        copyir.comcom
E        copyir        copyir.comcom0002    Fuser Low Temperature Error
1        copyir        copyir.comcom Fuser Temperature at the time of turning on was 50 to 100C        copyir        copyir.comcom but it does not rise up to 120C within 150 seconds after that        copyir        copyir.comcom
2        copyir        copyir.comcom Fuser Temperature at the time of turning on was higher than 100C        copyir        copyir.comcom but it does not rise up to the setting temperature within 270 seconds after that        copyir        copyir.comcom
E        copyir        copyir.comcom0003    Fuser Temperature Abnormal Fall Error
The difference of temperature between center and side of fuser becomes 50C or more        copyir        copyir.comcom
E        copyir        copyir.comcom0004    Fuser Temperature Abnormal Fall Error
The Lamp of fuser lights (Signal HEAT1 is “H”) to heat up the Fuser Roller in the ready condition        copyir        copyir.comcom but even 1C of temperature rise can not be accomplished within 30 seconds        copyir        copyir.comcom
E        copyir        copyir.comcom0005    Fuse Error
Fuse (F1) is broken        copyir        copyir.comcom
E        copyir        copyir.comcom0010    Main Motor Error
The Main Motor Output Detection Signal (MAINM_LD) continues to be “H” for 3 seconds or longer when the Main Motor is rotating        copyir        copyir.comcom
E        copyir        copyir.comcom0013    Paper Tray Motor Error
The Paper Tray Motor Output Detection Signal (CSETM_LD) continues to be “H” for 3 seconds or longer when the Paper Tray Motor is rotating        copyir        copyir.comcom
E        copyir        copyir.comcom0020    Counter Error
The Counter Connection Detection Signal (COUNT_OPN) continues to be “L” for 1 second or longer after turning on        copyir        copyir.comcom
E        copyir        copyir.comcom0031    Image Corona Output Error
The Image Corona Output Detection Signal (IM_LD) continues to be “L” for 1 second or longer when the Image Corona is ON        copyir        copyir.comcom
E        copyir        copyir.comcom0032    Separation Corona Output Error
The Separation Corona Output Detection Signal (AC_LD) continues to be “L” for 1 second or longer when the Separation Corona is ON        copyir        copyir.comcom
E        copyir        copyir.comcom0033    Transfer Corona Output Error
The Transfer Corona Output Detection Signal (TR_LD) continues to be “L” for 1 second or longer when the Transfer Corona is ON        copyir        copyir.comcom
E        copyir        copyir.comcom0034    Bias Output Error
Bias Output Detection Signal (BIAS_LD) continues to be “L” for 1 second or longer when a specified bias is supplied to the corresponding Developer Unit components        copyir        copyir.comcom
E        copyir        copyir.comcom0040    Cutter Error
1        copyir        copyir.comcom The Cutter Home Sensor Signal (MSCUT_L or MSCUT_R) does not change to “H” within 100 millisecond since the Cutter has started the operation        copyir        copyir.comcom
2        copyir        copyir.comcom The Cutter Home Sensor Signal (MSCUT_L or MSCUT_R) does not change to “L” within 1 second since the Cutter has started the operation        copyir        copyir.comcom
E        copyir        copyir.comcom0050    FPGA Error
Initialization of FPGA is failed after turning on        copyir        copyir.comcom
E        copyir        copyir.comcom0070    Developer Error
1        copyir        copyir.comcom The Connector J        copyir        copyir.comcom253 is not connected        copyir        copyir.comcom
2        copyir        copyir.comcom The Switch (MS4) is “open” condition        copyir        copyir.comcom which detects open/close of Engine Unit or Toner Hatch        copyir        copyir.comcom
E        copyir        copyir.comcom0080    Density Sensor Error
Density Sensor cannot be calibrated correctly before Density Measure        copyir        copyir.comcom
E        copyir        copyir.comcom0081    Density Sensor Error
Density Sensor cannot be calibrated correctly before Density Measure        copyir        copyir.comcom
E        copyir        copyir.comcom0090    Eraser Lamp Error
1        copyir        copyir.comcom The connector J        copyir        copyir.comcom227 / J        copyir        copyir.comcom228 is not connected        copyir        copyir.comcom
2        copyir        copyir.comcom Eraser Lamp (PW6631) is broken        copyir        copyir.comcom